Used processing machines

Sand aerator COLLIN

Carried by 2 belts trapezoid, t projector drum with 2 bars Suitable to be applicated under the grinder or in a little sandblast manufacture Sand is spitted in the pin. In good condition

Vibrating conveyor BMD, 2600 mm x 860 mm x 200 mm

2 motors FEIGE, type V17110/4, 1,6 kW, 1440 rpm, 380 V Vibrating motors below the grid With 3 silent blocks on each foot The bottom of the conveyor is equipped with rubber Possibly suitable for tumble blast machine

Mobil articulated arm screw mixer AXMANN, 10 t

• Manufacturer: Axmann

Dimensions: length 7200 mm, width 1900/1500 mm, height 3600 mm With rail trolley With sand hopper With pneumatic brake With 2 pneumatic slides for sand inlet

1983 Automate core shooter 22 l, HOTTINGER

• Manufacturer: HBM - Hottinger

Construction year: 1983, weight: 6500 kg Automatic machine, hydraulic tighness, pneumatic ejector With hydraulic group, cabin, extract mat width 700 mm

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

1991 Furan sand mixing plant WÖHR, double arm, 15t/h

• Manufacturer: Wöhr

Jib lenght 5200mm; (3200+2000mm) Live rings with pneumatic brake With 3 storage tanks 1 for resin 2 for hardener with catch basin, With dust collector KELLER With control board SIEMENS S5-100U With sand hoper ±6t

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

Hopper with dischargingbelt

Bunker with extraction belt for moulding machine ULLRICH + ROSER Content ± 4,3 m³, belt, 650 mm x 600 mm Driven by moto- gearbox and chain Output ± 0,6 m³/min Shaft 1600 x 2000 mm, h. 1950 mm

Dosing srew, Ø 50 mm, with hopper

Year of construction: 1990, weight: 140 kg Motor BAUER, type 022-10/DK94241K, 1,1 kW, 99 rpm (exit), 220/380 V, brake motor With inductive rotation measuring sensor With agitator for the product flow The scew ove...

1998 Gassing unit coldbox LÜBER LW-FDA-825i

• Model: LW-FDA 825

Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...

Amine Gas Washer BGT, 20 000 m³/h

• Manufacturer: BGT

400/690V; 29kW; 50HZ With protection basin: Ø2200mm; Height: 750mm; Volume: 2,85m³ With PH-electrode and control unit With control unit S7-300 With dust separator With exhaust fan With chimney With CE in document...

1999 Core shooter DISA, 200 l

Type: GFD 200 MP, serial number: KB0 001 Construction year: 1999, weight: 24 t Core box: Maximum height: 1340 mm, minimum: 870 mm Maximum width: 1500 mm, minimum: 530 mm Machine table: 1100 mm x 1300 mm, table li...

2014 Core shooter LAEMPE LL10

• Manufacturer: Laempe / Röperwerk

Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...

Ladle heating station PROMEOS

• Manufacturer: Prometeos

Serial number: 00131010360µYear of construction: 2013 Dimensions: Length: 2000mm, Width: 2200mm; Height: 2600mm Made for siphon pans Burner insert 600mm For natural gas H; 10 ±0,05Wh/m³ Each machine has an operat...