Used ~4' x

Goulds 3316 3×4-11H, Cast Iron Bronze fitted, 10.25″ Impeller Diameter

• Manufacturer: Goulds
• Model: 3316M

Unused Condition Goulds pump model 3316 size 3x4x11H, Cast Iron Bronze fitted, 10.25″ Impeller Diameter

ROTO HAMMER FLOOR STAND FS100 W/ 12" HANDWHEEL FS100-12, CAST IRON, BLUE

• Manufacturer: ROTO HAMMER

ROTO HAMMER FLOOR STAND FS100 W/ 12" HANDWHEEL FS100-12, CAST IRON, BLUE ROTO HAMMER INDUSTRIESFS100-12FLOOR STAND FS100 (NON INDICATING)W/ 12" HANDWHEEL.BLUECAST IRONBOTTOM MOUNT DIMENSIONS:5 3/4" X 5 3/4"MANUAL...

3/4 inch steel plate used, ¾” thick used steel plate 4ft width x 8ft length

3/4 inch steel plate used, ¾” thick used steel plate 4ft width x 8ft length 8 used sheets available 4ft x 8ft. 2 used sheets available 4ft x 6ft Approximate weight per (4’ x 8’x 3/4"thick) sheet 979 lbs., Deliver...

8 Ingots moulds 2 x ±4l

Dimensions: Length: 1100 mm, width: 300 mm; height: 230 mm Internal dimensions bottom: 150 x 110 mm; top: 220 x 370 mm with round trunions, 1 side with square pin in suplement for tilting Without support construc...

V-belt pulley 3-groove cast iron – SPA 125 2012 (13 mm) 35360

• Manufacturer: Guss

V-belt pulley, belt pulley with taper bushing, taper tensioner bushing, taper lock tensioner bushing

Sand silo 19m³

Dimensions: Ø2400mm; height: 9600mm Useful dimensions: Ø2400mm; height: 5000mm without cone With fill level probe With silo filter With railing and access ladder

Gassing unit LAEMPE - LG15 CB

• Manufacturer: Laempe / Röperwerk

With display for operating pressure, flushing pressure and operating pressure valves

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

ROSE TRUCK & CASTER CO. Cast Iron Swivel Caster Wheel RC-465 USED

• Manufacturer: ROSE TRUCK & CASTER CO.

Wheel: 5 3/4" x 5 3/4" x 1 3/4" Flange: 6 7/8" x 5 5/8" Holes center to center: 4 3/8" Expedited shipping services are available This piece is located at Ideal Machinery, Inc. on our showroom floor. Located at:...

Nobake moulding plant IMF

± 150 m rolling conveyor 4 x transfer wagons Mixer IMF, 30 t/h, equipped for furan process ROLLOVER with mould/pattern separation Mould manipulator IMF for overhead crane Painting station Pattern Fastloop

Shake-out grid 3090 x 1820mm

Brand: STERLING, Serial number: M.4587 Motor CEM, 11 kW, 1445 rpm, 220/380 V Axle with out of balance weights With belt pulley Ø 310mm, 2 grooves width 23mm, on 20 wilsprings (4 x 5) Twining with S3075 is possible

Shake-out grid 3090 x 1820mm

Brand: STERLING, Serial number: M.7239 Motor CEM, 11 kW, 1445 rpm, 220/380 V Axle with out of balance weights With belt pulley Ø 310mm, 2 grooves width 23mm, on 20 wilsprings (4 x 5) Twining with S3072 is possible

Angle Iron Rolling Machine Angle Bar Roller

• Manufacturer: MH

600(5# angle iron) Angle iron, Flat steel, Min coil diameter, Power consumption, Weight 2-5#, -25 x 4, Φ250(2# angle iron, -25 x 4 flat steel), Φ600(5# angle iron), 4kw, 325kg