Used compression cylinders

Pendulum grinder Ø500

Dimensions: length: 2800mm; width: 1400mm; height: 800mm With pneumatic cylinder for bending -( down pushing assistance) the machine With 2 motors, each 11 KW 400/690V; 50Hz V belt driving

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

2007 Sand feeder 31 liters, KLEIN

• Manufacturer: Klein

Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...

Gravity casting machine, useful dimensions 450 mm x 600 mm

Operated by a pneumatic cylinder, Ø 200 mm 2 guide rods, Ø 65 mm, 1750 mm x 600 mm, h. 720 mm Has been used with moulds 50 mm x 420 mm x 540/350 mm

RÖPER H5, overhauled and modernised

• Manufacturer: Laempe / Röperwerk

Presetting of the table via crank With new gassing carriage With clamping system RÖPER (One fixed jaw, manually adjustable, with quick closing system, one pneumatic side, lifting capacity 20 mm, presetting by qui...

2007 Sand feeder 31 liters, KLEIN

External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...

Core shooter RÖPER-HANSBERG H25

• Manufacturer: Laempe / Röperwerk

Height between table and shooting head 705 mm With hydraulic table lift Motor HALTER, hydraulic, type: Di112 A4,4 kW, 1440 rpm, 220/380 V With electric control cabinet 1 clamping plate stationary adjustable 1 cla...

automatic core dipping plant METATEC

• Manufacturer: Metatek

Dimensions: Lenght: 3950mm;Width: 2700mm; Hight: 2450mm Dimesnions of basin: Lenght: 1900mm; Width: 1430mm; Depth: 650mm core clamping arm 1440mm×380mm with 2 diaphragmpumps for viscosity measurement and regulati...

RÖPER H12 overhauled and modernized

• Manufacturer: Laempe / Röperwerk

Shot volume: 12 litersTable: 400 mm x 700 mmPresetting of the table height with hand crankWith new gassing slideWith original RÖPER clamping system(1 fixed clamping jaw, 1 pneumatic clamping jaw, stroke ± 20 mm, ...

2000 Core shooter LAEMPE LB25 and mixer LAEMPE SM7

• Manufacturer: Laempe / Röperwerk

Corebox measurements and weights Maximum gassing area with gassing manifold (alu): 580mm x 700mm Optional: gassing area with gassing hood and integrated cope eject plate: 550mm x 630mm Optional: shoot head, shoot...

2/4 Spindle Tapper Low Price Thread Tapping Machine Full Automatic Thread Tapping Machine

• Manufacturer: regenboog

Machine Features STEADY FEEDING OF MATERIAL BY AIR PRESSURE. EASY ADJUSTMENT AND MAINTENANCE OF BELTS. RAISES 30% - 40% LIFETIME OF TAP THAN CONVENTIONAL TAP. HIGHER EFFICIENCY, EASY TO CHANGE TAP AND CAN WORK SE...

Automatic Hex Nut Tapping Machine

• Manufacturer: regenboog

Machine Features STEADY FEEDING OF MATERIAL BY AIR PRESSURE. EASY ADJUSTMENT AND MAINTENANCE OF BELTS. RAISES 30% - 40% LIFETIME OF TAP THAN CONVENTIONAL TAP. HIGHER EFFICIENCY, EASY TO CHANGE TAP AND CAN WORK SE...