Used compression in Wallonia, Belgium

Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter

1989 Core sand mixer, 135 l = 200 kg, BADIE KSU 200

Brand: MIXTENSIF, type: KSU 200 Motor MERGER, type: MM 132 M4, 7,5 kW, 10 hp, 220/380 V, 20/ 144 A With 2 pneumatic discharge flaps, with cover

Refractory sprayer VELCO-ROTAMAT

• Manufacturer: Velco Rotamat

Gear motor 4kW; 5,5PS; 50Hz; 8,6A; 380V Water inlet 1" 1/4 - without hose, flow rate 1.1 m³/h With hose ±4m With compressed air supply hose With vibrator on funnel

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Greensand mixer capacity 5-6 t /h, SPEEDMULLOR 30A

Motor NORMACEM 13,2 kW, 220/380 V, 960 rpm Direct drive without gearbox, 2 horizontal grinding wheels With switch cabinet, pneumatic cover for sand filling, idem separated for the additives

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

Hotbox coreblower FM20

• Manufacturer: FMI

Dimension: Lenght: 1940mm; Width: 1000mm; Hight: 1750mm With 2 sides, With 2 sides pneumatic clamping strocke 2×200mm max width core box 345mm Control by automatic Toshiba E×40

Furan sand screw mixer BORDEN, ± 5-10 t

External dimensions: length 3400 mm, width 1250 mm, height 2200mm Between axe input and exit 1700 mm Ø of the tube 240 mm Comannd over automat TELEMECHANIK TSX2720 With pneumatic slide With sensor on the cover

1997 Screw mixer IMF 2m³/h with hopper

• Manufacturer: IMF

Dimensions with hopper: Length: 1900mm; Width: 1800mm; Height: 3100mm With 2 manually adjustable pumps With electriccontrol by contactors With CE label 2,2kW; 895rpm; 50Hz; 380V With pneumatic slide valve at the ...

Core sand mixer V&S Mischka III

• Manufacturer: VOGEL&SCHEMAN

Type: Mischka III GF contenance : 200 lit. = 300 kg Dimensions: Length: 1200mm; Width: 1400mm; Height: 1650mm; Inner dimensions: Ø950mm; Depth: 520mm With pneumatic discharge flap With emergency stop With protect...

Screw mixer for chemical sand, 2 - 3 t/h

For chemical sand With 2 new hand adjusted pumps, with new control cabinet With new motor, 4 kW, 700 rpm, 220/380 V With pneumatic slider, adjustable opening

Mounting press BÜHLER Pneumet 3

220 V, 50 Hz, 5,4 A Type 20-2195-220; Serial number 478; MHIE 230, 1200W, model 20-1595-220 Automatic- pneumatic mounting press for samples with electric heating

Chromite sand separation plant GUT., 4-stage

• Manufacturer: G.U.T.

With Siemens panel With pneumatic sand conveyor 18´% Quarz sand separation in 4 stages: Composed of: 1 x silo, 60t with cooler and magnetic particle separator 2 x sandconveyor 1 x silo, 25t, state 2-4

1991 Furan sand mixing plant WÖHR, double arm, 15t/h

• Manufacturer: Wöhr

Jib lenght 5200mm; (3200+2000mm) Live rings with pneumatic brake With 3 storage tanks 1 for resin 2 for hardener with catch basin, With dust collector KELLER With control board SIEMENS S5-100U With sand hoper ±6t

Rapid mixer FORDATH-PACEMASTER, 1,5-2,5 t

Year of construction: 1974, overhauled, weight: 1000 kg Motor 4-5 hp, 220/380 V Useful height entry of sand 2200 mm Hydraulic pneumatic at the output of sand, with 2 vormixaxle Inside Ø 130 mm