Used compression in Wallonia, Belgium

Furan sand screw mixer IMF 3 t./h.

• Manufacturer: IMF

Screw mixer: Dimensions: 1400mm; Width: 1000mm; Height: ±1900mm with pneumatic slider With 2 pumps driven by mixer motor With control cabinet and Simatic panel

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side With declaration of conformity CE

Core sand mixer VOGEL + SCHEMANN, 50 l

• Manufacturer: Vogel & Schemann

External dimensions: length 900mm, width 650mm, height 1140mm For charges of 50 l = 75 kg max. With manuel door and protections Extra charge for pneumatic door

Core sand mixer 120l

Dimensions: Length: 750mm; Width: 800mm; Height: 1350mm Internal dimensions: Ø620mm; depth: 470mm With pneumatic outlet flap Without protective grid on the mixing bucket With on/off switch

Screw mixer for core sand REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

With Two-chamber hopper ( 1,3m³) With screw and little hopper for additiv With acid pump With controlboard Automat SIEMENS S7 300 Mixer is swivelling by pneumatic cylinder Mixer screw:lenght: ±2000mm

1983 Automate core shooter 22 l, HOTTINGER

• Manufacturer: HBM - Hottinger

Construction year: 1983, weight: 6500 kg Automatic machine, hydraulic tighness, pneumatic ejector With hydraulic group, cabin, extract mat width 700 mm

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

RÖPER H12 overhauled and modernized

Shot volume: 12 litersTable: 400 mm x 700 mmPresetting of the table height with hand crankWith new gassing slideWith original RÖPER clamping system(1 fixed clamping jaw, 1 pneumatic clamping jaw, stroke ± 20 mm, ...

2006 Decoving machine MASDIM

With 2 pneumatic hammers With 2 vibrating motors to shake out the sand With electric control by PLC ALLEN BRADLEY With noise protection cabin With full automatic process With sand extraction belt

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

Pendulum grinder Ø500

Dimensions: length: 2800mm; width: 1400mm; height: 800mm With pneumatic cylinder for bending -( down pushing assistance) the machine With 2 motors, each 11 KW 400/690V; 50Hz V belt driving

Sans convoyeur ± 100 l

• Manufacturer: FONTEC

External dimensions: length: 750mm, width: 750mm, height: 1120mm Tank Ø 450 mm , height 650mm , input Ø180 mm, exit Ø 70mm With pneumatic ventil on the input side

Jolt squeeze moulding machine BMD ARPA700

With pin lifting Static forming pressure 11000 kg, dynamic 33 000 kg Mould dimensions: maximal 840 mm, 800 mm under floor (in put) Command panel completely pneumatic

Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter