Used Foundry & Casting in Belgium

2001 Pouring ladle 3,5t BLUMENBECKER

• Manufacturer: Foundry Service

External dimensions: Length: 1900mm; Width: 1350mm; Height: 2150mm Internal dimensions: Ø1070mm; Depth: 1080mm With planetary gearbox With crane eye With traverse protection

Bottom pouring ladle with planetary gear, 8 t

Brand: FOUNDRY SERVICE, serial number: 4827 With one bottom pouring device ,with out horizontal arm and plug bar are not inclluded With 2 pouring spouts

Hardrubber protection for shakeouts 1,43 m x 1,15 m

• Manufacturer: DIGANT

Brand: GIGANT, weight: ± 75 kg Hole pattern 50 mm x 50 mm Width between hole pattern 30 mm Temperature resistance 70 °C, maximum 80 °C Molded and vulcanised Preserving and sound-absorbing For foundries, recycling...

Silicone moulding press for centrifuge, 2 x 350mm

Brand AB, type: S2000, serial number: TRF2/350 Giri 300-700 Pneumatic press with 2 swivel tables Ø 350 mm For silicone pattern discs For centrifugal casting of small parts like jewellery, figurines, medals, etc.

Pneumatic slag gripper

Dimensions: 1000mm; Width: 860mm; Height: 2400mm On stand With crane eye Pneumatically controlled (connections above) All existing jaws are supplied 2 different models for casting flat jaws and square jaws

Moulding line for chemical sand FDC/AXMANN

• Manufacturer: Axmann

With sand regeneration With AXMANN- mixer 30 rpm, connection arm, pumps, cistern 2000 l With vibration table, robust roll conveyors 3 motorised transfer carriages With cooling vibrating conveyor, length 18 m With...

2008 Fettling Centre MAUS SAM300 S

• Manufacturer: Maus

Cast part: length 300mm, width 300mm, height 250mm, Ø 360mm, weight 15 kg With 1 vertical cutting/grinding disc With 1 vertical grinding disc With 1 inside grinding tool

Permeameter SIMPSON

• Manufacturer: Simpson

Dimensions: Length: 260mm; Width: 330mm; Height: 430mm 220V;50Hz;0,1A Suitable for the following processes: Cold Box Core oil Clay-bonded sand Hot Box Nobake/Air blower Shell/Croning (sand for cast mould shells a...

Ladle suspension system IAS 2,5t

• Manufacturer: IAS

External dimensions: Length: 2100 mm; Height: 2200 mm

Pneumatic sand feeder HENSEL 100l

• Manufacturer: HENSEL

Dimensions: Length: 1160 mm; Width: 800 mm; Height: 1320 mm Max. temperature = 200 °C

Core sand mixing installation STEFFENS ±2t/h

• Manufacturer: STEFFENS

System consisting of mixer, hopper, transfer trolley and dosing station for resin and hardener Mixer: External dimensions: Length: 700 mm; Width: 900 mm; Height: 1500 mm Usable dimensions: Ø600 mm; Depth: 460 mm ...

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

1980 Dry Discgrinder HERZOG HT 350-2

• Manufacturer: Herzog

Type: HT350-2, Year: 1980, in very good conditions With installed dust filter

1989 Vibrating dryer TECHNOFINISH

• Manufacturer: TECHNOFINISH

Make: TECHNOFINISH | Weight: ± 1000 kg | Dimensions: Ø 1560mm, height 1300mm | Motor: 380 V, 50 Hz | Useful width: max. 450mm