Used compression in Belgium

Pneumatic slag gripper

Dimensions: 1000mm; Width: 860mm; Height: 2400mm On stand With crane eye Pneumatically controlled (connections above) All existing jaws are supplied 2 different models for casting flat jaws and square jaws

Pneumatic needle hammer

Pneumatic Hammer HITACHI, HS5

• Manufacturer: Hitachi

With pneumatic 2 hand control Weight: 400 kg | Dimensions: length 1900mm, width 540mm, height 560mm | Shot axis: Ø 100mm | Air pression: 6 bar | Force of impact: 2805 Joule

Pneumatic clamping unit on table

Flared 550 mm in offset Speady clamping over pneumatic bellows Ø 280 mm

2009 Pneumatic sand feeder NEUHOF, with CE type plate, 150 l

Type: PDGF150, serial number: 271 With compressed air-fluidizing base inside With height-adjustable feet With level sensor on the top With pneumatic vent valve and overpressure valve

Pneumatic Hammer CLANSMAN CC100

• Manufacturer: CLANSMAN DYNAMICS

Air capacity, 40 l / 6 bar / shot Year: 2004 | Weight: 400 kg | Dimensions: length 1300mm, width 700mm, height 1000mm

Pneumatic dust colletor ± 65 l

Pneumatic dust feeder conveyer in spherical shape With pneumatic valve flap

Pneumatic central board for OSBORN 716

• Manufacturer: ACRO JOUCOMATIC

Control board for the pneumatics of moulding machine OSBORN 716 With pneumatic plan

Fish mouth activated with pneumatic piston

Fish mouth activated with pneumatic piston In working condition

Pneumatic sand transporter 220 l

Type: DE12, Serial number: 9484 Year of construction: 26/11/2001, Weight: ± 300 kg With gate valve Ø 160mm, outlet Ø 80mm Without command panel

pneumatic sand sams longer than ±600mm

Several brands With a rubber tip In good working condition, without warranty, repainted with second hand ramming foot If requested with new ramming foots for an additional price of 60 € (round - rectangular, sphe...

Pneumatic rams, length up to 600 mm

• Manufacturer: Rams

Several brands With a rubber tip In good working condition, without warranty, repainted with second hand ramming foot If requested with new ramming foots for an additional price of 60 € (round - rectangular, sphe...

Pneumatic sand conveyor BONIFACE 125 l

Type: TP125, Serial number: 12560 With 2 sand inlets Ø 160mm, with 2 pneumatic flaps Sand exit Ø 70mm, sand inlets height ± 1600mm Manometer on pressure, a sensor high level, with compressed air regulator and dry...

1995 Pneumatic sand feeder FAT 500l

Sand feeder; FAT brand Capacity 500 litres 8 bar operating pressure With control unit

Pneumatic sand rams longer than ±600mm, width

• Manufacturer: Rams

Several brands With a rubber tip In good working condition, without warranty, repainted with second hand ramming foot If requested with new ramming foots for an additional price of 60 € (round - rectangular, sphe...