Used processing in Netherlands

M1291 Zinc table Used

M1291 Zinc table Used 1000 x 1000 mm, on castors Table: 1000 x 1000 mm Material: zinc/copper/steel/aluminium, etc.

M1099 Kader Marking Table PRV 55 Used

M1099 Kader Marking Table PRV 55 Used 1000 x 1000mm with 2 x 4 adjustable centres for marking out gutters Kader Typ PRV55 2 x 4 adjustable centres Measure of centre points Table: 1000 x 1000 mm Material: zinc / c...

M1424 JÖRG Coil Carrier 9001 Used

• Manufacturer: Jörg

The M1424 JÖRG Coil Carrier 9001 Used for transporting coils of up to 250 kg. Includes ‘trolley function’ for placing the coil without lifting equipment. Equipped with an adjustment bolt to level the coil. A fold...

JÖRG Multiple Decoiler 2910 - 2952

• Manufacturer: Jörg

The JÖRG Multiple Decoiler 2910 - 2952 allows the operator to choose from 4 or 6 different coils to cut. After hanging the coils in the frame, the operator can change the plate by operating the push buttons, with...

JÖRG Decoiler ASM

• Manufacturer: Jörg

The JÖRG Decoiler ASM Motorized, cantilever fully steel welded frame and adjustable brake to prevent auto unwinding. The mandrel is selve centering so that different coil ID are simple to change. Cantilever, Coil...

JÖRG Decoiler 2952

• Manufacturer: Jörg

The JÖRG Decoiler 2952 has a hydraulic tension mandrel with a sensor under the coil. Standard with: Frequency-controlled motor Loop control with sensor under the coil Operation with portable control box on cable ...

JÖRG Coil Carrier 4923-50

• Manufacturer: Jörg

The JÖRG Coil Carrier 4923-50 is an simple but strudy coil carrier for support the coil during uncoiling. JÖRG Coil Carrier 4923-50 – 300 kg Coil width: 1250 mm Support capacity 300 kg For zink, aluminium, coper,...

JÖRG Decoiler AS 1,5/1250

• Manufacturer: Jörg

The JÖRG Decoiler AS 1,5/1250 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ...

JÖRG Coil Carrier 4902-50

• Manufacturer: Jörg

The JÖRG Coil Carrier 4902-50 is an simple but strudy coil carrier for support the coil during uncoiling. JÖRG Coil Carrier 4902-50 – 300 kg Coil width: 1050 mm Support capacity 300 kg For zink, aluminium, coper,...

JÖRG Decoiler AS 5/1000

• Manufacturer: Jörg

The JÖRG Decoiler AS 5/1000 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ar...

JÖRG Decoiler ASF 1000

• Manufacturer: Jörg

The JÖRG Decoiler ASF 1000 Manual Self Support are fully steel welded frame decoiler models with an adjustable brake to prevent auto decoiling. The coil support spindle is excecuted with an self centering device ...

JÖRG Decoiler AS 5/1500

• Manufacturer: Jörg

The JÖRG Decoiler AS 5/1500 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ar...

JÖRG Decoiler AS2 1,5

• Manufacturer: Jörg

The JÖRG Decoiler AS2 1,5 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers are ...

JÖRG Decoiler AS 1,5/1000

• Manufacturer: Jörg

The JÖRG Decoiler AS 1,5/1000 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ...

JÖRG Decoiler AS 1,5/1500

• Manufacturer: Jörg

The JÖRG Decoiler AS 1,5/1500 manual, with brake, are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use AS heavy decoilers ...