Used Pillar Drills & Drill Presses

Jet Model GHD-20 20" Floor Standing Mill/Drill Press, s/n 130701351; 60 to 3,000 RPM Spindle Speeds

Jet Model GHD-20 20" Floor Standing Mill / Drill Press, s/n 130701351; 60 to 3,000 RPM Spindle Speeds, MT-3 Spindle Taper, Jacobs No. 34 1/2" Drill Chuck, 15.5" x 18" Work Table, 2 HP, 230 Volt, 3 Phase Mill Dril...

SEARS-CRAFTSMAN 113-21371 DRILL PRESS

• Manufacturer: Craftsman

SEARS-CRAFTSMAN 113-21371 DRILL PRESS S/N:, (110/60/1 electrics), S-5091 Standard Specifications: *Additional specifications available upon request*

Rockwell Delta 17-600 Drill Press 17" #2 Morse Taper 5" Stroke 3/4 HP 230/460V

• Manufacturer: Rockwell
• Model: 17-600

Used, in Good Working Condition, Tested. This has a #2 Morse Taper. Has adjustable speed. Max height is 45" to the floor bed. Table bed is 17x12.5. Has a 5" stroke. Takes 3 Ph 230/460v power. Wired for 230V If th...

FCG-610 CHEVALIER BENCH-TYPE UNIVERSAL TOOL & CUTTER GRINDER w/MICROSCOPE

• Manufacturer: Chevalier
• Model: FCG-610

FCG-619 CHEVALIER BENCH-TYPE UNIVERSAL TOOL & CUTTER GRINDER w/DINO-LITE DIGITAL MICROSCOPE - maple bench cabinet - Imperial Metric FCG-610 CHEVALIER BENCH-TOP UNIVERSAL TOOL & CUTTER GRINDER w/DINO-LITE DIGITAL ...

Rockwell/Delta #9856 - Rockwell/Delta 11-100 Drill Press #9856

• Manufacturer: Rockwell

Rockwell/Delta 11″ Benchtop Drill Press, 11-100 Inventory # 9856 4-Speed Step Pulley Head Pedestal

TAS Iron Ltd. TAS Iron Ltd. - M40 Drill Press #9912

• Manufacturer: TAS

TAS Iron M40 Geared Head Drill Press with Automatic Down Feed and Tapping – New, In Stock, & Ready to Ship! SPECIAL FALL PRICING! Inventory # 9912 Adjustable Power Down Feed Automatic Tapping Cycle Drill Chuck an...

Smith-Courtney Co. Drill Press

Smith-Courtney Co. Drill Press – Model H 🛠️ Condition: Poor – older unit that has not been used in years. Functionality is unknown. Offered AS IS for parts, repair, or restoration. 📦 Buyer is responsible for remo...

Milwaukee Magnetic Drill Press

• Manufacturer: Milwaukee

Milwaukee Magnetic Drill Press

Rockwell-Delta Rockwell-Delta Drill Press, 1980s

• Manufacturer: Rockwell

Model: 15-665 ½” Jacobs Drill Chuck T-Slotted Base Production Table w/Coolant Trough ¾ Horsepower Spindle Motor Machine is set to run with 1 Phase 110 Volt Electronics

CRAFTSMAN 20" DRILL PRESS

• Manufacturer: Craftsman

ONE USED CRAFTSMAN 20" DRILL PRESS. NEEDS NEW MOTOR. MUST BE ABLE TO LOAD ITEM WITHOUT ANY ASSITANCE FROM CGW. THIS ITEM IS LOCATED AT THE WASTEWATER TREATMENT PLANT. IF YOU HAVE ANY QUESTIONS, PLEASE CALL WES AT...

Bux Milwaukee Magnetic Drill Press

• Manufacturer: Milwaukee

Bux Milwaukee Magnetic Drill Press

Walker Turner Drill Press Ettco Tapping Head 1/4" Steel Capacity 230/460V 3Ph

• Manufacturer: Walker Turner

Used, in Good Working Condition. Tested. No 6 to 1/4" taps in steel. Mounting base is 26x24" Has oil pan drain. Wired for 230V 3Ph 3" stroke. If this item ships as Flat Rate Freight please see details in Shipping...

Procunier Size 3 Drill Press Tapping Head 1/2"Steel Capacity 230/460V 3Ph

• Manufacturer: Procunier

Used, in Good Working Condition. Tested. Pneumatic controls with a foot pedal. Size 3 for up to 1/2" steel. Mounting base is 30x21" plus oil pan. Wired for 230V If this item ships as Flat Rate Freight please see ...

2024 Solberga/Willis geared head Drill press

• Manufacturer: Solberga
• Model: SE

Direct gear drive with fiber to steel mesh helical drive gears providing smooth, quiet operations, 20" Throat, 25mm 1" capacity, with Power feed option Two speed, 1.5 HP motor and electrics, Table with raising m...

Dayton 16" Drill Press, Model 3Z918D, S/N 200010, 1/2-HP, 120 Volt

• Manufacturer: Dayton

Dayton 16" Drill Press, Model 3Z918D, S/N 200010, 1/2-HP, 120 Volt