Used forge and hammer

8,000 lb Erie Drop Forging Hammer, Re:25971

• Manufacturer: Erie Press Systems

Dismantled and moved to storage Very good working condition

6,200 kg Nittan Air Forging Hammer, Model ADH-60-I,

• Manufacturer: Nittan

Additional information: Standard dropping section weight (upper mold not included) (kg): 6200 Standard upper section weight(Nominal value) (kg): 1800 Stroke（ｍｍ）: 1300 Cylinder diameter: 580 mm Piston diameter: 21...

2023 ANDROMAT HH3 PNEUMATIC HAMMER

• Manufacturer: ANDROMAT

Andromat Hammer, Model HH3, 6 Bar, 87 psi, 1030 Lb-Ft Energy, 500 Lb Shipping Weight, UNUSED, New in Original box

GFM SX 06 Radial Forging Machine

• Manufacturer: GFM

Forging force: 80 Ton | Number of hammers: 4 | Number of strokes per minute: 1,200/minute | Range of shift on diameter: 35 mm | Forging eccentric: 3 mm | Firing hammer length: 150 mm | Basic material maximum dia...

NAZEL 4B 600LBS Blacksmith Power Forging Hammer Pneumatic Self-Contained

"Normal wear from use but that- OVER 30 years ago, and since then- always kept in dry storage. You MUST read the history of it below. Great condition with smooth ram cylinder surface. i.e. no scoring. It will nee...

40,000 kg Schloemann (Beche) CounterBlow Forging

• Manufacturer: Schloemann (Beche) DGH 40

Size: 40,000 kgs | Stroke: 1,250 mm | Ram l-r: 3,200 mm | Ram f-b: 3,000 mm | Bpm: 80 | Anvil l-r: 3,000 mm | Anvil f-b: 4,800 mm | Between the guides: 1,200 mm | Total hammer weight: 235,000 kgs | Floor space l...

1,250 kg Lasco model KH-125 Forging

• Manufacturer: Lasco

Additional Info: Weight of falling ram: 1250kg Way between the slides: 500mm Motor power: 22kW Weight of anvil: 19 tons Total weight: 31.5 tons Height above floor: 5000mm Total Height: 5700mm

17,000 lb (7,800 kg) Eumuco Electro-

• Manufacturer: SMS Eumuco

Additional info: Work resulting a blow: 10,000kgm (real 80,000kgm) Height of fall: 590mm Weight of ram hammer: 7,800kg Shut height: 330~660mm Clearance distance between guidance: 940mm Depth of ram hammer: 1,000m...

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

• Manufacturer: Beche

Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

2,900 kg Lasco model KH 315

• Manufacturer: Lasco

Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm

10 tons Hammer Forging Hydraulic Line KGK1600

• Manufacturer: Lasco

1) Hydraulic Forging Hammer Make : Lasco, Model : KGK1600, Blow capacity : 16,000 kgm, Capacity of continuous blow/minute : 60 to 70, Blow high with standard die : 1100 mm, Hammer total weight : 287 tons, ...

Drop-Hammer-100-LBS

"Normal wear from use, needs a good cleaning. some rust. broken valve handle." Weight...2380lbs. Height...93″Floor footprint...28″ L-R, 22″ F-B. Currently bolted onto a steel plate that is 22″x22″x1″ thick. The a...

Bradley Cushioned Hammer

• Manufacturer: Bradley

Line shaft driven, working condition is unknown. Wooden hammer beam appears to be in great shape. Machine looks to be in good condition. Shipping is not available for this lot.