Used controller in Bavaria, Germany

Fill level control

• Manufacturer: vbw-weihenstephan

Additional title: Fill level inspection | Nominal capacity of filler: 50000 b/h

Label and fill level control

• Manufacturer: Heuft

This label and fill level inspection system from Heuft Systemtechnik GmbH (built in 2010) is designed for high-frequency fill level inspection, label checking, and product rejection. The system features the Heuft...

5,000 liter RIEGER mash immersion tank / full immersion tank with overflushing device and sieve cylinder with cooling jacket and control in V2A 21-0045EUBA 21-0045EUBA

Cat. no.: 21-0045EUBA Condition: Used Piece: 1 RIEGER mash dipping tank 5.000 liter, full immersion tank with flushing device and sieve cylinder with cooling jacket and control in V2A Dimensions: Total height: 48...

Bottle filling line for disposable bottles

Bottling line with a capacity of 30,000 bph. 0.33 litre Vichy, 0.33 litre Euro and 0.5 litre NRW non-returnable bottles can be used. The line consists of the following machines/components: - New glass unscrambl...

3-vessel brewhouse

• Manufacturer: Joh. Albrecht

3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system | Brew size: 2000 l | Length: 2600 mm | Width: 5000 mm | Height: 4500 mm | Operation / control: Manual control with heati...

5-vessel-brewhouse

• Manufacturer: Huppmann

5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle wit...

Blending apparatus

• Manufacturer: Albert Handtmann Holding GmbH & Co. KG / Esau und Hueber

This mixing plant from Albert Handtmann Holding GmbH & Co. KG / Esau and Hueber is designed for the precise and efficient mixing of liquids. The plant is equipped with four mixing lanterns and a control cabinet m...

empty bottle inspector

• Manufacturer: Heuft

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in ...

Blending plant

• Manufacturer: Diessel

Diessel blending plant for 180 hl/h with 2 IDM, on stainless steel frame

Premix system

• Manufacturer: Ortmann+Herbst

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated wat...

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

Wort aeration

• Manufacturer: Turbo Air

Turbo Air Wort aeration DN40 mounted on frame, mobile

2011 CFS Buehl GmbH OME.0000

• Manufacturer: CFS/Koppens

CFS formatter The machine is used as a component in a in a line for cutting, sizing and and packaging of food products. It fulfills two functions: - In the sizer, individual In the formatter, incoming portions ar...

KEG filling line

• Manufacturer: KHS GmbH

Additional title: cleaning and filling | Capacity: 60 Keg/h each 50 l | Operation / control: Siemens S7-300 | Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet