Used test rf in South Africa

Astronics R8600 | Radio Test Hub

The R8600 Radio Test Hub is designed to meet the demanding requirements of RF production environments. Able to withstand 150 Watts of continuous RF power input, the R8600 was explicitly engineered to provide a co...

Snap On 32 mm up to 750 MHz

The TBCP2-250 is a snap-on RF current monitoring probe. The probe has a very flat response with a 3dB bandwidth of 250 MHz and is characterized over the frequency range from 30kHz to 300 MHz. Upon request, it can...

Dummy Load (-105dBc) Connector: N-F

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-F

Dummy Load (-105dBc) Connector: DIN-M

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: DIN-M

Probe for 3 kHz to 100 MHz

The TBCCP1-3K100 is a coaxial RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat ...

Dummy Load (-105dBc) Connector: N-M

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M

TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...

TBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025

• Manufacturer: LiSN

The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...

Coupling Decoupling Network M4

The TBCDN-M4 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M4 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Coupling Decoupling Network M2

The TBCDN-M2 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M2 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Coupling Decoupling Network M3

The TBCDN-M3 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M3 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F

• Manufacturer: LiSN

The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...

Coupling Decoupling Network M1

The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...

TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...