Used Recycling & Disposal in Germany

washing drum

• Manufacturer: Neue Herbold

Washing Drum Application of the Washing Drum / Pre-Wash Drum In a plastics recycling plant for polyolefins where pre-separation of coarse contaminants such as stones, metals, glass, etc. is required – as well as ...

Round silos

• Manufacturer: Neue Herbold

Round Silos Round Silos for Storage / Ensiling Storing recyclable materials is an important and essential component of a complete plastic waste processing plant. NEUE HERBOLD supplies suitable silos and complete ...

Neue Herbold LP 45/100 #13293

• Manufacturer: Neue Herbold
• Model: LP

Use: Plastic | Rotor diameter: 450 mm | Rotor width: 1000 mm | Rotor knives: 9 rows | Stator knives: 2 rows | Motor drive: 75 kW

AMIS Magnetic drum

• Manufacturer: Amis

The AMIS magnetic drum is used to remove iron contamination from the conveyed material. It is installed as a final roller in a conveyor belt and is therefore a very cost-effective metal separator. The magnet drum...

drainage screw

• Manufacturer: Neue Herbold

Dewatering Screw Application of the Dewatering Screw The material, which is simultaneously washed and shredded in the wet cutting mill (washing mill), falls into a dewatering screw, which separates the dirt disso...

AMIS Overhead magnet

• Manufacturer: Amis

Our self-cleaning overhead magnets are suitable for the continuous removal of ferromagnetic (Fe) particles – such as iron or steel – from material streams containing a relatively large amount of Fe. Overhead magn...

Filter Integrity Tester - Pall Filtrationstechnik - Flowstar XC - 352287G

• Manufacturer: Pall
• Model: FLOWSTAR XC

Filter Tester - Pall - Flowstar XC - 352288G

• Manufacturer: Pall
• Model: FLOWSTAR XC

Update Soon

Filter Integrity Tester - Pall Filtrations Technik Flowstar XC - 43915

• Manufacturer: Pall
• Model: FLOWSTAR XC

Filter Tester - Pall GMBH Filtrations Technik - Flowstar XC 3.3c - 352813G

• Manufacturer: Pall

Filter Tester - Pall Filtrations Technik - Flowstar - 343146G

• Manufacturer: Pall

Mechanical step dryer T

• Manufacturer: Neue Herbold

Mechanical Step Dryer T Use NEW HERBOLD step dryers of the T series were specially developed for the gentle drying of plastic-PET regrinds. They are suitable for removing surface moisture from granular plastics. ...

Tube mills and profile mills SR

• Manufacturer: Neue Herbold
• Model: SR

SR Tube Mills and Profile Mills Areas of Application of the NEUE HERBOLD Tube Mill Profile Mill SR The NEUE HERBOLD SR series granulators can shred thick, long pipes and profiles. The horizontal feeding allows lo...