Used processing

Cartridge And Candle Filter 0.93 m² (10 ft²) Hastelloy - C276 - IPP# 207030

• Manufacturer: Pall

Trinity filter housing Trin-Cor serial #60702, Part # 4HD 4886-1778. Pressure drop 4 psi @ 500 GPM Inlet & outlet connections are 2.5 " weld neck flanges. Filter has four 1" weld neck flanges for draining and ven...

Filter Press, 9.6 Sq.Ft. filtration area, 316 Stainless Steel, manufactured by Alsop - IPP# 247248

Stainless Steel 321 Tower Filter - IPP# 239451

• Manufacturer: Bethlehem Corp

Size 2 CS structural Tower Filter press Ref 96-1129-3

Rosenmund and Cogiem Filter 5.9 m² (64 ft²) Stainless Steel 316 - IPP# 92661

• Manufacturer: Rosenmund

316 stainless steel agitated jacketed pressure Nutsche filter Filter volume 7200 liters Drive manufactured by Von Roll, Type CRG5 Hydraulic racker lift driven by 0.75 HP, 3/50/500 volt, 1450 rpm motor. Packing gl...

Hastelloy - C22 Rosenmund and Cogiem Filter - IPP# 230453

• Manufacturer: Rosenmund

Agitated Pressure Filter The 24.5 Liter vessel is rated -1/6 Bar @ -20 to 200 degree C The 2.7 Liter jacket is rated -1/6 Bar @ -20 to 200 degree C. The .3 Liter Heated Base is rated -1/6 Bar @ -20 to 200 degree ...

Stainless Steel 316 Stalwart international BPEFP Pressure Leaf Filter - IPP# 222032

• Manufacturer: International

vertical sparkler type filter cGMP rated and sanitary construction buff polished to a mirror finish Rated for 3.5 kg/cm2 With a cake holding capacity of 64 Liters 18" x 15. (15 plates) Main filter body bolts toge...

Stainless Steel 316 Pressure Leaf Filter - IPP# 241128

• Manufacturer: Sparkler

pressure filter

Stainless Steel 304 Chemap A10 Pressure Leaf Filter - IPP# 89349

• Manufacturer: Chemap

Funda filter with centrifugal discharge Shell 900mm diameter x 960mm from flanged top to bottom discharge (22) 800mm diameter filter elements @ 30mm spacing Requires 15 PS motor Wet cake discharge

Pressure Leaf Filter 5 m² (54 ft²) Stainless Steel 316 - IPP# 98476

• Manufacturer: Mannedorf (Zurich)

304SS jkt on sidewalls Dry cake discharge Filter tank measures 750mm dia x 1035mm str side, bolt dish top, cone btm 440mm long w/304SS dia btm discharge opening Vert tank W/packing gland on shaft horiz leaf design

Stainless Steel 316 Chemap Ag (Switzerland) R-5 Pressure Leaf Filter - IPP# 82224

• Manufacturer: International Process Plants

Funda pressure leaf filter W/centrifugal dry cake discahrge Shell 508mm dia x 150mm l

Pressure Leaf Filter 6 m² (65 ft²) Stainless Steel 316 - IPP# 94604

• Manufacturer: Artisan

continuous filter/washer Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each st...

Pressure Leaf Filter 5.5 m² (59.2 ft²) Glasslined - IPP# 89418

• Manufacturer: BHS

Shell manufactured by BHS, Serial 329063 Glass #8000. with 7-internal filter plate. full vacuum (810 liter) Feed has 2-50mm w/(2) vibratory feeders Top has additional 4-100mm nozzles Bottom discharge is 500mm

Pressure Leaf Filter 4.6 m² (50 ft²) Hastelloy - C22 - IPP# 203742

• Manufacturer: Dr. Mueller

Fundabac Filter 970 liter capacity, jacket is 170 liters

Pressure Leaf Filter Stainless Steel 304 - IPP# 204104

70 ltr pressure filter Centrifugal discharge packing gland on shaft Motor: 220/480 V

Pressure Leaf Filter 4.6 m² (49.5 ft²) Stainless Steel 304 - IPP# 94385

• Manufacturer: R Stihler

Filter body manufactured by R Stihler, serial #9018 Filter tank capacity 593 liter. with (2) vibratory motors Motor: 3 phase non-flameproof motors and bottom cone