Used processing

Pressure Leaf Filter 15 m² (161.9 ft²) Stainless Steel Austenitic - IPP# 217843

• Manufacturer: Schenk

vessel # 5293GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter, vertical jacketed centrifugal discharge. Cake capacity 0.45 cubic feet.

Pressure Leaf Filter 15 m² (161.9 ft²) Stainless Steel Austenitic - IPP# 217842

• Manufacturer: Schenk/Germany

Vessel #: 5292GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter centrifugal discharge. Cake capacity 0.45 cubic feet

Stainless Steel Austenitic Schenk ZHF-SR15 KLKB1 Pressure Leaf Filter - IPP# 215247

• Manufacturer: Schenck

Vessel Number 5056GW Capacity: 955 liters Centrifugal wet cake discharge (32) 805mm diameter elements, (2) 805mm diameter scavenger elements mechanical seal

Stainless Steel Austenitic Schenk ZHF-SR15 KLKB1 Pressure Leaf Filter - IPP# 215246

• Manufacturer: Schenck

Vessel Number: 5055GW Capacity: 955 liters Centrifugal wet cake discharge Elements: (32) 805mm diameter elements, (2) 805mm diameter scavenger elements Seal: Mechanical seal under driven

Pressure Leaf Filter 1 m² (10.8 ft²) Stainless Steel 304 - IPP# 208499

• Manufacturer: Filter-1

Funda filter Chemap WA number: 6470 3/50/220/380 volt

Stainless Steel 321 Schenk ZHF-S80 Pressure Leaf Filter - IPP# 208456

• Manufacturer: Schenck

vessel volume 5250 liter approx 1.6m diameter x 1.6mm straight side vertical chamber, approx 300mm discharge, mounted on (3) stainless steel legs, associated equipment includes 1 x 3000 liter vertical stainless s...

Filter Press, 473 Sq.Ft. Filtration Area, Polypropylene Plates, Manufactured by Von Roll - IPP# 204427

• Manufacturer: Von Roll

(30) chambers, 5 eye, closed delivery.

Filter Press, 371 Sq.Ft. Filtration Area, Polypropylene Plates. - IPP# 108393

recessed filter plates only, 3 eye, side botom discharge, open/closed delivery, 1.04 cubic meter cake capacity With red & blue buttons (washing plates).

Filter Press, 14 Sq.Ft. Filtration Area, Carbon Steel Plates Manufactured by Shriver - IPP# 108249

• Manufacturer: Shriver

4-eye closed delivery, Manual closure.

Filter Press, 334 Sq.Ft. Filtration Area, Polypropylene Plates, Manufactured by Schenck - IPP# 89441

• Manufacturer: Schenck

30mm thick cake, 2 end plates center feed open delivery. hydraulic closure rated 650 bar, cylinder 200mm dia.

Polypropylene Schenk Membrane Filter Press - IPP# 204563

• Manufacturer: Schenck

Membrane filter press, hydraulic driven by Siemens 500 V 50 Hz 4,2 A 1410 rpm EEx e II.

Polypropylene Filter Press Plates Only - IPP# 108390

(16) chambers, 1.72 cubic meter cake capacity 2-eye top side feed, Red and blue buttons (washing plates).34.5

Polypropylene Perrin 800—P25-50-37-17MNLS Filter Press - IPP# 225367

• Manufacturer: Perrin

Polypropylene plates and frames and all Stainless Steel skeleton. approximately38 chambers. 4 eye closed delivery, 1" inlet and outlets. Manual closure with Hydraulic Assist manufactured by SPX.

321 Stainless Steel Seitz 60A100 Filter Press - IPP# 229372

• Manufacturer: Seitz

@ 20/40 degrees C, 321 stainless steel (1.4541) frames,

304 Stainless Steel Durco EP470/32-25 Filter Press - IPP# 230398

• Manufacturer: Durco

recessed plate filter press, complete with (25) chambers (1) head plate, 5 eye, closed delivery. 32mm cake thickness. single pneumatic hydraulic ram closure mechanism. (completely pneumatic operation, no electric...