Used in Zug, Switzerland

Foaming

• Manufacturer: Balti AG

Up to 100-800% (adhesive dependent) Inert gas (mostly N2) in the form of small, compressed air bubbles is homogeneously mixed into the pressurized hotmelt in a controlled dosing and mixing unit (dynamic). Those e...

Pressure Monitoring

Mostly today, before and also after feeding and dosing pumps, filters, nozzles, etc. pressure switches (detection of min. or max. pressure) or pressure sensors with an analog (mostly 0-10V) output signal are used...

Volume Flow Measurement

Two different methods are used for volume measurement. Traditionally, the rotation (volume per tooth step) is measured and evaluated by an independent, non-driven gear pair. However, this method is particularly s...

Valve Monitoring

One or more sensors monitor the position of the adhesive valve (open/closed).

Optical Monitoring

• Manufacturer: Balti AG

Various and very innovative standard and self-developed sensors can be a low-cost, but also high-quality solution. Compact vision systems, as increasingly marketed by a wide variety of suppliers, still satisfy ap...

Static Mixer

• Manufacturer: Balti AG

With the use of "high-end" steel mixing elements, hotmelt can be mixed in-line as efficiently as possible. Depending on the material properties and requirements, the mixing elements are installed directly on the ...

Dynamic Mixer

• Manufacturer: Balti AG

For very demanding applications (e.g. extreme differences in viscosity), a dynamic mixing head is used for temperatures up to 200°C.

Coloration

• Manufacturer: Balti AG

Special color is added in quantities of 0.5 to 3%, usually with a static mixer (color mixer - FM). Ideally, the color is added as close as possible to the nozzle to reduce waste during color change.

Spray Nozzles

• Manufacturer: Balti AG

Spray valve with integrated or upstream spray air heating together with the spray nozzle form the spraying system. With air support, the adhesive is lengthened or torn apart when it exits the nozzle and distribut...

Piston Dosing Feeder

• Manufacturer: Balti AG

Supplied by a balti melting plant and based on the balti accumulator principle, the piston dosing unit is used for stationary, non-dynamic dosing. This means that a certain amount of adhesive with a certain press...

Dosing Pump Valves

As already mentioned under Delivery / Dosing Pumps, the dosing pump valve (DPV) is the crowning glory of dosing, as it is integrated directly in the application head and placed directly in front of the nozzle. Th...

Hand Guns

Versatile and practical hand gun for manual application of adhesives and sealants in a wide range of shapes thanks to a wide range of standard and customized nozzles. With a spray air extension on the hand pistol...

Automatic Open/Close-Valves

On/off valve for spot, bead and spray application: Versatile application valve for manual and automatic application of standard and reactive adhesives and sealants in a wide range of shapes and sizes thanks to cu...

Roller Coater

Beschichten mit der Walzenauftragstechnik ist weit verbreitet. balti hat sich in den letzten Jahren einen ausgezeichneten Namen erarbeitet mit einem umfassenden und qualitativ auf höchstem Niveau operierenden Hot...

Round Nozzles

• Manufacturer: Balti AG

Large, thick, thin, long, short, etc., there are no limits to the nozzle variety. Whether contactless spraying or, as is usually applied (nozzle tip is guided over the surface at a certain height), the type of ad...