Used processing in Opole, Poland

Viessmann 720 KW oil furnace

Capacity 720 KW Year 1995

Emergency cooler for 3.5 MW furnace

Total of 8 fans, under them high-efficiency coolers Two segments, one segment will cool 1500 KW

Furnace for drying sawdust and wood chips

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Furnace, sawdust boiler with a stoker

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Froling 500 KW 25 furnace

500 kW heating furnace TURBO MAT 500 TYPE Fuel-burning furnace for biomass, bark, wood chips, and sawdust Built in 2007 Movable grates 8.5 m long, 200 mm diameter fuel screw Very good technical condition More pho...

Urbas 1.5 MW furnace

A 1.5 MW furnace. The furnace is fueled by biomass, bark, wood chips, and sawdust. Built in 2000. The boiler is equipped with a VERTICAL HEAT EXCHANGER, which significantly simplifies cleaning, as all ash falls ...

Expansion vessel for 3000 l furnace

Diameter 140 cm Total height 260 cm Capacity 3000 l Year 1994

Froling 200 KW biomass stove

Furnace with a heating capacity of 200 kW TYPE Lambdamat FWT 200 Year 1996 Fueled by biomass, bark, wood chips, and sawdust. New lining!!!

WEN 108 air and smoke furnace fan

Inlet 70 x 100 cm Outlet 70 cm Motor 22 kW

Ash conveyor, waste removal from the Ż 34 furnace

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

Urbas 4 MW furnace

Furnace with heating capacity of 4 MW Furnaces for biomass, bark, woodchip, sawdust. Moisture content of the material up to 60% Furnace available from July-August 2025

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm