Used processing in Germany

1994 IMR BP 255S
- Manufacturer: IMR
Tool dimension d=500 mm LP- Die casting machine Melting furnace content 3100 kg Melting capacity 600 kg/h Installed power 95 kVA acting power 85 kW nozzle heating 1.2m³/h gas 2 manipulators in diameter cast piece...
Iserlohn, Germany
1992 IMR B3R-160
- Manufacturer: IMR
Total content 2800 kg usable contant 2300 Installed power 95 kVA Acting power 85 kW Nozzle heating 1.2 m³/h gas EXW- ex Works, as seen without dismantling from Germany
Iserlohn, Germany
1994 IMR C40U
- Manufacturer: IMR
Technical details: for tool dimensions within a diameter of 420 mm Production capacity 350 kg/h installed power 4 kW Hydraulics 175 l Graphite tanks with agitator volume content 650 l As seen, without dismantling...
Iserlohn, Germany
1994 IMR C40U
- Manufacturer: IMR
Technical details: for tool dimensions within a diameter of 420mm Production capacity 350 kg / hour installed power 4 kW Hydraulics 175 l Graphite tanks total volume 650 l No agitator, pump defective EXW- ex Work...
Iserlohn, Germany
1994 IMR C40U
- Manufacturer: IMR
Technical details: for tool dimensions within a diameter of 420 mm Production capacity 350 kg/h installed power 4 kW Hydraulics 175 l Graphite tanks with agitator volume content 650 l As seen, without dismantling...
Iserlohn, Germany
2014 FAT Cold resin molding system semi-automatic without Mixer 20 t/h used for sale
- Manufacturer: F.A.T.
Mainly consists of: Heating cooling unit marke FAT without Furan sand mixer 20 t/h double joint Radius: 1,750 mm + 3,500 = total 5,250mm 29 pcs. roller conveyors Vibration table 2 pcs. belt conveyors Cranes: 2 cr...
Iserlohn, Germany
2007 Shake-out 7 x 6,5 m, 75 t with complete Sand Regeneration Plant 15 t/h (no Bake)
- Manufacturer: Küttner
- Hours: 0.2891666666666667 hour
Shake-out 7 x 6,5 m, 75 t with complete Sand Regeneration Plant 15 t/h (no Bake) Mainly consists of: 2 pcs. Shake-out, dim. 3500 x 6500 mm; max. weights of 45 t = combined a large shake-out, dim.7000 x 6500 ...
Iserlohn, Germany
Roeperwerk H80
- Manufacturer: Laempe / Röperwerk
Mainly consists of: Core shooter H80 Roller conveyor for core box without housing Electrical control panel modernised with new Siemens S7 PLC controls and Visual display Lüber amine gasing device Typ LW- FDA 1640...
Iserlohn, Germany
ASEA / ABB LRI 5
- Manufacturer: Asea
Technical data: – frequency: 50 Hz – rated voltage: 530 V – rated current: 1720 A – nominal temperature: 1500°C
Iserlohn, Germany
2001 STEFFENS Schnellmischer SM-30
- Manufacturer: STEFFENS
Batch max. 30 l/45 kg, container Ø 400 mm, dual mixing principle: side and bottom mixing arms, capacity approx. 1 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, contro...
Meinerzhagen, Germany
2001 RÖPERWERK H 2.5 V-K
- Manufacturer: Laempe / Röperwerk
Shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, vacuum clamping device, hopper, housing, PLC control, control panel, STEFFENS sand mixer SM-30, GTG gassing device ...
Meinerzhagen, Germany
SEGAB PROMIX
- Manufacturer: Segab
Two-component binder system, dosing pumps, control unit
Meinerzhagen, Germany
1991 LAEMPE SM 5 3.5 T
- Manufacturer: Laempe / Röperwerk
Charge 70 kg, cycle time 70 s, capacity approx. 3.5 t/h, drive power 5.5 kW, connected loads 380 V, 50 Hz, volumetric sand dosing, binder dosing, control system
Meinerzhagen, Germany
2015 SEGAB PROMIX 150
- Manufacturer: Segab
Charge min./max. 50/150 kg, capacity approx. 3 t/h, pneumatic discharge lock, drive power 9.2 kW, connected loads 400 V, 50 Hz, safety interlock (on cleaning door and mixer hood)
Meinerzhagen, Germany
VOGEL & SCHEMMANN MISCHKA III GF-S/70 'D'
- Manufacturer: Vogel
Batch max. 500 kg, hopper Ø 925 x 600 mm, discharge height approx. 1000 mm, mixing paddle, pneumatic discharge gate, drive power 10.3 kW
Meinerzhagen, Germany