Used processing

Davis-standard Extruder

• Manufacturer: Davis-Standard
• Model: DS-125

99 Rpm / 1750 Name: Extruder | Arrival date: 10-03-2025 | Dimensions l x w x h (inches): 57 x 63 x 87 | Capacity: 11900LBS | Electrical: 1/50/60/240/115 | Weight (lb.): 1410 | Available quantity: 1

Extruder

No Nameplate Name: Extruder | Arrival date: 05-29-2025 | Dimensions l x w x h (inches): 65 x 67 x 80 | Weight (lb.): 4090 | Available quantity: 1

Extruder

No Nameplate Name: Extruder | Arrival date: 05-29-2025 | Dimensions l x w x h (inches): 66 x 65 x 80 | Weight (lb.): 3770 | Available quantity: 1

The Bonnot Company Extruder

• Manufacturer: Bonnot

W/electrical Cabinet, Hydraulic Units, 8" X 29" Opening, (3500#) 127x54x67, (612#) 79x61x20, (1600#) 90x48x53, (790#) 56x37x43, (210#) 36x21x56, *contains 5 Pieces

Extruder

No Motor Name: Extruder | Arrival date: 04-25-2025 | Dimensions l x w x h (inches): 52 x 32 x 57 | Weight (lb.): 595 | Available quantity: 1

Royle Extruder

• Manufacturer: Royle

Name: Extruder | Arrival date: 07-11-2025 | Dimensions l x w x h (inches): 70 x 65 x 71 | Capacity: 3" | Weight (lb.): 1670 | Available quantity: 1

Extruder

8.4/4.2a, 1755 Rpm Name: Extruder | Arrival date: 04-07-2025 | Dimensions l x w x h (inches): 34 x 47 x 56 | Capacity: 3 HP | Electrical: 3/50/60/230/380/460 | Weight (lb.): 935 | Available quantity: 1

3.5" Davis Standard Cold Feed Rubber Extruder

• Manufacturer: Davis-Standard

3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...

2014 Davis-Standard Super Blue 75MM

• Manufacturer: Davis-Standard

Used 3″ Davis-Standard Super Blue 75MM Extruder with BPM Bay Plastics Machinery WBX1210-15 Water Bath, EVAK-06 Vacuum Air Knives, and SB 100 Pelletizer, 2014: DS Super Blue Single Screw Extruder: – 3″ (75MM) – L/...

3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line

• Manufacturer: Davis-Standard

3 Roll Sheet Stack Davis-Standard 1.25" Extruder Line 10" 3 roll sheet stack line, consisting of: 1.25" Davis Standard extruder, model DSPW-125V-H24, 24:1 L/D, electrically heated, water cooled with circulation p...

10" Ribbon Slot Die

10" Ribbon Slot Die Used 10" Ribbon slot die, fed from 1.5" heated feed throat, 8.5" diameter feed side.

85 Cu Ft (2,400 Liter) Welex Cooler, Model 2400 HC, S/S

• Manufacturer: Welex

85 Cu Ft (2,400 Liter) Welex Cooler, Model 2400 HC, S/S Used 85 cu ft (2,400 liter) Welex cooler, model 2400 HC, stainless steel construction, with bolt on paddles, belt driven by 30 hp, 230/460 volt motor, (4) a...

0.75" Brabender Extruder, 25:1 L/D, Model 2503

• Manufacturer: Brabender
• Model: 2503

0.75" Brabender Extruder, 25:1 L/D, Model 2503 Used 0.75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt, serial# 1313.

19 MM APV Baker Perkins Twin Screw Extruder, Model MP-19-TC

• Manufacturer: APV - Gaulin

19 MM APV Baker Perkins Twin Screw Extruder, Model MP-19-TC Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 25:1 l/d, electrically heated, water cooled barrel,...

Bonnot Single Screw Extruder

• Manufacturer: Bonnot

Bonnot Single Screw Extruder Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed t...