Building Filters
2016 OKUMA MILLAC 561VⅡ
- Manufacturer: Okuma
- Model: MILLAC 561V
Travel: X: 1,050, Y: 560, Z: 520mm Distance between table and spindle nose: 170～690 mm Spindle taper: BBT50 (BIG plus) Hinged lift-up chip conveyor (rear, left discharge) Spindle center through (coolant 7.0 MPa) ...
Osaka, Japan
2016 Emura Sales Corporation Model ECM-201
- Manufacturer: Emura Sales Corporation
Weight: 184 kg Slice size: 0.7 mm to 100 mm" (depending on blade)
Toyonaka, Japan
2016 Yamazaki Giken YZ-500WR
- Manufacturer: Giken
- Model: YZ-500WR
Travel X : 1,250 Y : 550 Z : 520 mm Distance from spindle to table top : 140 to 660 mm X-axis stroke extension (stroke 1250 mm) Chip coil conveyor (inside the machine) Table splash guard Partition type Pull stud ...
Osaka, Japan
1996 Trailmobile PMR439BH
- Manufacturer: Trailmobile
16-wheel heavy equipment hauling trailer Middle drop 6.5m 2-diff pull Width 299cm Maximum load 32.7t Front turning radius: 94cm Floor to ground clearance: 70cm King pin to ground clearance: 135cm *Fifth wheel loa...
$32,617 USDYokohama, Japan
Steel engine cutter concrete asphalt body junk dry type 420 Husqvarna diamond blade set
- Manufacturer: Husqvarna
The main unit of this item is treated as junk. No compression when pulling recoil and no spark. The Husqvarna Proffesional Diamond Blade Dry 420 12" was used only once to cut asphalt 2m long, 50cm wide and 10cm d...
Tsuruoka, Japan
Futaba AFE-100
- Manufacturer: Futaba
Futaba Electronics 100mm Air Feeder AFE-100 Width 100mm, thickness 0,1-1,5t, feed length 130mm Solenoid valve type Pull direction
Hamamatsu, Japan
Yamato RE201
- Manufacturer: Yamato
Manual lift with analog control Features of Rotary, Evaporators (RE201) Features Economical Features Improved operability with variable type rotary joint, distillation flask pull-out structure, Hose joint, large ...
Tokyo, Japan
2025 Japan Full Half DFPFH341A Revision
- Manufacturer: Japan Full-Half
With inspection until July, 2008 Never used 3-axle Aluminum Block Flat Trailer 13m body Max. load 27.4t Lift axle (When axles are lowered: rear front axle weight 2160kg, rear middle axle weight 2160kg, rear rear ...
$73,388 USDYokohama, Japan
Trace Elemental Instruments XPLORER-TX/TS
- Manufacturer: Trace Elemental Instruments
more Total Halogen and Sulfur Analyzer The XPLORER-TX/TS is a microcoulometric combustion analyzer for the analysis of total halogens and total sulfur. The small footprint allows it to blend into every laboratory...
Kyoto, Japan
Trace Elemental Instruments XPLORER-NS
- Manufacturer: Trace Elemental Instruments
more Total Nitrogen and Sulfur Analyzer The XPLORER-NS was developed as a total nitrogen/total sulfur combustion analyzer, capable of handling fully automated applications for liquids, solids, and gases (includin...
Kyoto, Japan