Used Sanders

Trusted Seller
Ramtech 4-Head Moulder Sander Stock #62183
- Manufacturer: Ramtech
Ramtech 4-Head Moulder Sander Hydraulic Outfeed w/ Photo eyes to Kicker Outfeed, Setup Stand
Hughesville, PA
Trusted Seller
SHOPMADE LARGE/LONG SINGLE-SIDED EDGE-SANDER
- Manufacturer: SHOPMADE
LARGE/LONG SINGLE-SIDED SHOPMADE EDGE-SANDER SN:N/A, (220/440/60/3 electrics), S-4658 Standard Specifications: * Inquire for additional specifications *
Hickory, NC
Trusted Seller
SMI Single Head Wide Belt Sander
- Manufacturer: SMI
- Phase type: Three-phase
SMI Single Head Wide Belt Sander 37" width capacity Digital readout Electronic raise & lower of feed table Combination drum & platen sanding head
Milwaukee, WI
Trusted Seller
Stahle Saturn Quatro (4-Head) Narrow Belt Sander Stock #7216
- Manufacturer: Stahle
Stahle Model Saturn Quatro (4-Head) Narrow Belt Sander Head Configuration: -- Two (2) Top Combination Head Sanding Units Powered by 4kW (5.5HP) Motors -- Brush Head Powered by .37KW (0.5HP) Motor -- Two(2) Bottom...
Hughesville, PA
Rehnen RS-2010 Edge Sander
- Manufacturer: Rehnen
- Model: RS-2010
The Rehnen RS-2010 Edge sanding machine is designed for enhanced user-friendliness. The edge sanding machine RS 2010 – which features a diverse range of equipment – performs all edge sanding tasks in the ùeld of ...
Stoneboro, PA
Rehnen SK4 Edge Sander
- Manufacturer: Rehnen
- Model: SK-4
Rehnen Edge Sanding Machine Sk4. Model: SK-4 Motor: 4kW, 5.4 HP Belt size: 150x3330mm (5.9×131.1”) Platen size: 180x1370mm (7.09×53.94”) Table working height: 930mm (36.61”) Main table size: 350x1250mm (13.78×49....
Stoneboro, PA
Sandingmaster 37" Widebelt Sander
- Manufacturer: Sandinmaster
- Model: 2075C
37″ single head Sandingmaster wide belt sander. Model 2075C. Single combination head with a platen. 37″ x 75″ sanding belts. 18HP 220v 3PH. This machine is cleaned and tested, and works good.
$4,900 USD
Stoneboro, PA
Trusted Seller
2002 Grizzly "G9982" Oscillating Edge Sander
- Manufacturer: Grizzly
- Phase type: Single-phase
Grizzly "G9982" Oscillating Edge Sander 2 hp motor 1/4" oscillation 6" x 108" belt 7" x 36" platen
Milwaukee, WI
Trusted Seller
CEMCO 50" DOUBLE-HEAD WIDE-BELT SANDER
- Manufacturer: Cemco
CEMCO 50" DOUBLE-HEAD WIDE-BELT SANDER S/N:WBS-512, (230/460/60/3 electrics), S-5104 Standard Specifications: 50” wide capacity with 6” opening 1st head: 50 HP, 230/460/60/3 motor, (rubber contact drum) 2nd....
Hickory, NC
Trusted Seller
2002 Grizzly "G9982" Oscillating Edge Sander
- Manufacturer: Grizzly
- Phase type: Single-phase
Grizzly "G9982" Oscillating Edge Sander 2 hp motor 1/4" oscillation 6" x 108" belt 7" x 36" platen
Milwaukee, WI
Trusted Seller
FLETCHER HAND-BLOCK SANDER
General Specifications: - 7.5 HP, 230/460/60/3 drive motor - (2) 14” diam. x 6-1/2” wide face rubber covered drive and idler pulleys - 96” x 48” rolling table - 6” wide x 249” long abrasive belt length - Manual m...
Hickory, NC
Trusted Seller
FLETCHER FT-30 SINGLE-SIDED EDGE SANDER
- Manufacturer: FLETCHER
FLETCHER FT-30 SINGLE-SIDED EDGE SANDER S/N:8630-I, (208-230/460/3 electrics). H-1522 General Specifications:(to be verified) - 5 HP 208-230/460/60/3 sanding belt motor - 8" diameter rubber covered drive pull...
Hickory, NC
Northtech VES1230 Vertical Edge Sander
- Manufacturer: Northtech
The Northtech VES1230, is a vertical edge sander, perfectly suited for sanding drawer boxes, or other similar products. The VES1230 has a 12″ x 102″ sanding belt, and is powered by a 7.5HP 3PH motor for plenty of...
Stoneboro, PA
Trusted Seller
Grizzly G8749 Drum/Flap Sander Stock #62203
- Manufacturer: Grizzly
Grizzly Model G8749 Drum/Flap Sander Motor 1HP; 1PH; 110 Volt Speed 1725 RPM Arbor Diameter 22mm Arbor Length 6" Bench Top Unit Currently Mounted on a Pedestal Serial No. 028 This is a part of a total plant liqui...
Hughesville, PA
Max Universal,24 Inch Disk Sander 230/460V
- Manufacturer: Max
“Used, in working condition will ship freight or local pickup” What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photos t...
$1,950 USD
Galion, OH
Heesemann LSM8 Sander
- Manufacturer: Heesemann
- Model: LSM8
Good condition Heesemann LSM8 Sanders available between 1997 and 2012 years. Located in Germany and other countries. Click request price for more information.
Germany