Used Punch Presses in Lombardy, Italy

I.M.V. PRESSE SERVO KERS

• Manufacturer: I.M.V.PRESSE

real flexibility is not movement only, but its matching to full energy availability An exclusive system developed by IMV that makes it possible to keep plenty of energy available for the deformation phase, thus r...

I.M.V. PRESSE LEVER 1

• Manufacturer: I.M.V.PRESSE

Modified knuckle joint for trimming thin metal pieces and sheet metal The kinematic mechanism is especially studied to concentrate the slowdown during the cycle phase nearest to the B.D.C., thus leaving more poss...

BRUDERER BSTA 25H - Cod.055

• Manufacturer: Bruderer
• Model: BSTA 25

Bruderer 25H - Year of construction 1977. Force: 25 ton | Adjustable stroke: 13 - 38 mm | Speed: 100 - 1500 spm | Bolster: 530x530 mm | Shutheight sdau: 256 mm (stroke 38 mm) | Max coil width: 203 mm

Spring hammer

• Manufacturer: Mario Di Maio SpA

Spring hammer, cast iron structure, hammer head and block (diam. 80) mm made of special treated steel.

WUPA PS 3.3 A

TECHNICAL DATA. Year of construction 1981 - Non-Stop Feeder - Cleaning station - Lower gripper detachment - Non-Stop exit roller - Centerline - 1 set of tools - Total extension 600 mm Used, professionally cleaned...

Millutensil Fine blanking

• Manufacturer: Millutensil

Power lines fine blanking It is a blanking process that produces finished parts with smooth, perpendicular cutting surfaces, free from tears. This reduces or even eliminates the need for costly secondary machinin...

1996 IMS PHY 75

• Manufacturer: IMS
• Model: PHY 75

Typology: Sheet metal processing | Punching power: 75 ton | Punching capacity: mm Ø 32 x 37 | Adjustable punch stroke: mm 0 ÷ 80 | Recess depth: 510 mm | Strokes / min: n° 36 | Hydraulics: V | Ømax punching: 28 ...

2009 SUNRISE PM 80 LT

• Manufacturer: Sunrise

Typology: Sheet metal processing | Punching power: 80 tons | Punching capacity: Ø25×23 | Work plane dimension: 700×700 MM | Maximum travel: 100 | Recess depth: 510 mm | Strokes / min: 28 | Hydraulics: V | Ce mac...

Blanking press.

• Manufacturer: A.e.m. 3

Closed structure front protection Closed structure rear protection Closed structure right side protection Left side protection, closed structure Lower floor - machining / Slots for T-nuts upon customer request Mo...

BLANKING PRESS.

• Manufacturer: A.e.m. 3

Electric/pneumatic vertical gate front protection Closed structure rear protection Closed structure right side protection Left side protection, closed structure Lower floor - machining / Slots for T-nuts upon cus...

N°6 presses for high production.

• Manufacturer: A.e.m. 3

- Adjustable working force Ton 60 – 600 - Useful clearance between columns on operator side mm 2700 - Useful clearance between side columns mm 1900 - Maximum working surface 2800mm x 2200mm - Travel of the mobile...

Blanking press.

• Manufacturer: A.e.m. 3

Closed structure front protection Closed structure rear protection Closed structure right side protection Left side protection, closed structure Lower floor - machining / Slots for T-nuts upon customer request Mo...

200 ton press for blanking.

• Manufacturer: A.e.m. 3

Closed structure front protection Closed structure rear protection Closed structure right side protection Left side protection, closed structure Lower floor - machining / Slots for T-nuts upon customer request Mo...