Used Processing in New Jersey, USA

FLUID DYNAMICS

• Manufacturer: FLUID DYNAMICS

(3) FLUID DYNAMICS jacketed Basket/Bag Filter. 316 Stainless Steel. 3" 300 lb. flg. in/out. 1/8 mesh. Filter rated for 610 deg F. CS jacket rated for 275 PSI @ 610 deg F. Lug mounted. NB # 23.

FILTERITE

• Manufacturer: FILTERITE

(2) Each, FILTERITE Cartridge filter. Rated 150 PSI @ 200 degF. Type: 18CMC3S-2-IP. 2" Threaded inlet and outlet. Approx. 8" x 32" Lgth.

AO SMITH CORP

• Manufacturer: A.O. Smith

AO Smith filter. Has 3" inlet/outlet. Material: CS

CRALL PRODUCTS S160-14-15-60-S

• Manufacturer: CRALL PRODUCTS

Qty (2) EACH: Stainless Steel Cartridge Filters. Crall Products model S160-14-15-60-S. 37429-2, NB# 2040. Rated 150 PSI @ 150 degF. 14" dia x 4'6" T/T.

Process Solution Medical Grade Lift Drum Lift #13616

• Manufacturer: Process Solutions

Process solutions model ol36, serial # 1000049, omega lift, all s/s construction, with a 360 deg swivel rotation barrel dumper has a maximum weight capacity up to 1500 lbs. 146" h column, with approx 78" h rotati...

CORNELL D26 Versator Deaerator / Defoamer

• Manufacturer: Cornell

Cornell Versator model D-26 Deaerator / Defoamer. Stainless Steel contact parts. Driven by 25 HP, 230/460 v, 1770 RPM Mounted on Stainless Steel base with 7.5 HP Busch Vacuum Pump model LT 0170 and (2) Teco Cont...

Stainless Steel 304 Batch-Type Agitated Reactor - IPP# 207282

• Manufacturer: Process Systems ltd

Jacketed Pressure/Vacuum Reactor with Mixer Jacket rated MAWP for 100 psi @ 338 degrees F., MDMT for -20 degrees F @ 100 psi Vessel has two zone half pipe coil jacket Mixer was a double-motion agitator with scrap...

1968 Brighton FDWV-50510-BJD

• Manufacturer: Brighton

Brighton Vertical Dimple Jacketed Reactor Brighton, 1,000 Gallons Capacity, 182 PSI @ 350°F Jacket Pressure, 200/FV @ 350°F Internal Pressure, Top/Center-Mounted Pfaudler Agitator, 316-L Stainless Steel, Mounted ...

GEA EcoCut 225

• Manufacturer: GEA

GEA EcoCut 225 Emulsifier with capacity for 14,000-20,000 lbs/hr of product, depending on product viscosity. S/N: E011100105025. Equipment meets American Meat Institute (AMI) hygienic standards. The EcoCut does N...

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246699

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246701

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221215

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor`

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221214

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

IPP# 602135, Solid State Polymerization Plant Polymers - Fibres and Plastics

70 TPD PET - SSP Plant It is a facility that manufactures high-IV PET chips suitable for various bottle production by reacting low-IV PET chips produced in a melt polymerization process in a solid state to have h...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221283

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...