Used Processing in Bremen, Germany

125000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Bartec Schwarte

remarks: Manhole cylinder 510/410 mm; cylinder wall thickness: lowest segment: 4 mm; 3 subsequent segments: 3 mm; top 3 segments: 2.5 mm

10589 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): half-coil temperature control bottom (dj): double jacket technical equipment: level indicator (without guarantee), spray ball, ...

60 liter mobile stainless steel 316 vessel

• Manufacturer: Bolz

remarks: Mobile frame made of stainless steel 304; diameter of hand hole approx. 145 mm; vessel without bottom outlet

810 liter heatable/coolable, insulated agitator tank made of stainless steel 304 with beam agitator

• Manufacturer: Behälter KG Bremen

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 2.0 bar max. allowable working temperature (dj): 80 °C Temperature control cylinder (dj): thermoplate temperature control bottom...

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

4000 liter flat bottom storage tank, Aisi 304

• Manufacturer: Schwarz

remarks: Tanks slightly out of round; outlet is lower than tank bottom (note this during installation); sheet metal cutouts in the lid; nameplate only present on 2 tanks; 1 tank with ball valve (see photos)

60000 liter isolated storagetank, Aisi 304 with propelleragitator

• Manufacturer: Ahlborn

remarks: tank feet are spacers for the substructure/foundation. Small repair areas inside

60000 liter isolated agitatortank, Aisi 304 with Blade stirrer

Volume: 60.000 liter | Bottom: cone shaped bottom | Stand type: skirt support | Insulation: available | Diameter inside: 3.700 mm | Diameter outside: 3.880 mm | Total height: 9.200 mm | Manhole: in the cylinder ...

2500 liter tank, Aisi 316

• Manufacturer: Heinrich Nowak

Volume: 2.500 liter | Stand type: legs | Quantity legs: 4 Piece | Cylindrical height: 1.380 mm | Total height: 2.900 mm | Manhole: in the upper bottom | Technical equipment: crane eyes | Outlet: available | Late...

Stainless steel tank 0.3 cbm with agitator

1 cyl. upright stainless steel tank, used Contents: 0.3 cbm Order number: 4150 Material: V2A Dimensions: 890 mm diameter 450 mm cylindrical height 180 mm lower floor 420 mm ground clearance 1,150 mm appr...

Agitator tank 0.4 cbm with insulation hanging

1 cyl. hanging agitator tank made of stainless steel, used Contents: 0.4 cbm Order number: 3899 Material: V2A Dimensions: 600 mm diameter 800 mm diameter 1,400 mm cylindrical height 160 mm lower floor 50...

Agitator tank 0.55 cbm with insulation

1 cyl. vertical agitator tank made of stainless steel, used Contents: 0.55 cbm Order number: 4001 Material: V2A 1.4301 Dimensions: 930 mm diameter 1,070 mm diameter 800 mm cylindrical height 100 mm lower ...

1100 liter pharmacy pressure vessel, Aisi 316 with propeller agitator

• Manufacturer: SAV Leonhard Schliersmaier

max. allowable working temperature: 143 °C Volume: 1.100 liter | Vacuum: 1,0 bar | Max. excess pressure: 3,0 bar | Upper bottom: upper bottom removable / hinged | Stand type: legs | Quantity legs: 4 Piece | Diame...