Used processing in Opole, Poland

Urbas 4 MW furnace

Furnace with heating capacity of 4 MW Furnaces for biomass, bark, woodchip, sawdust. Moisture content of the material up to 60% Furnace available from July-August 2025

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Belt conveyor with bevel for grain, etc.

Grain conveyor Level length 1.20 m Bevel length 3.30 m Level length at the top 1 m Belt width 39 cm Total width 65 cm Chute 25 x 15 cm Discharge at a height of 3.20 m

Conveyor belt, conveyor belt, driven TA 254

Length 5.20 m Tape width 55 cm, tape with takers Total width 90 cm Height 35 cm Motor approx. 1 KW

Scraper, redler for sawdust, woodchips, etc. 58

• Manufacturer: ats maszyny drzewne asoltys kbanas sc

Length 7, 50 m Length of takers 28 cm Dimensions of the channels 29 x 18 cm

Conveyor belt, conveyor belt TA 253

Length 22 m Tape width 30 cm New tape Total width 40 cm Motor 1,7 KW

Vibrating trough, vibrorn 16

Length 12.50 m, total 13 m Trough width 65 cm Total width 85 cm Gutter height 20 cm Total height 80 cm Motor 5.5 KW

Saturator ALSIM CARBO 20

Saturator ALSIM CARBO 20 Used saturator in very good condition, Saturator ALSIM Carbo 20, capacity 20 000 l/h

Conveyor belt, ascending conveyor belt TA 250

Length of the so-called transport road - horizontal part7 m - part with a slant 9.5 m Discharge at a height of 4.75 m Belt width 110 cm Total width 130 cm , where the engine 150 cm Herringbone belt Motor 7.5/8.6 KW

Hydraulic unit 28

• Manufacturer: ats maszyny drzewne asoltys kbanas sc

3 KW motor Dimensions of the unit - length 90 cm - width 50 cm - height 90 cm

Conveyor belt, driven TA 236

Length of the transport route 6.80 m, total length 7 m Belt width 40 cm Height 40 cm

Conveyor belt, metal, driven TA 229

Metal strip Level length 230 cm Bevel length 140 cm Horizontal length top 50 cm Height of the dump 130 cm Belt width 20 cm, belt with takers Total width 35 cm + motor 70 cm Motor 0.55/0.63 KW, 1375/1650 rpm

Roller table, driven PR 228

Table length 167 cm Rollers length 60 cm Rollers with diameter 50 mm

Chain conveyor, horizontal, redler 4.5 m 25

Length 4.5 m Width and height of the so-called trough 30 x 20 cm Motor 1, 1 KW Year 2015