Used Machine Tools in Wallonia, Belgium

Precision tool sharpening machine KAINDL

• Manufacturer: KAINDL

Support adjustable to 4 sides With scale for support pivoting Table model Stone Ø 400 mm, width 40 mm With switch

2006 Shrink-in inducion unit for tools ISCAR

• Manufacturer: ISCAR

Unit with water cooling Controlled over microprocessor

Column drilling machine FLOTT

• Manufacturer: Flott
• Model: SB15

Dimensions: Length: 700mm; Width: 400mm; Height: 1950mm Table is height-adjustable by 670mm at the column On base

Machine vice, 160 mm x 50 mm

With hand crank Clamping jaws 160 mm x 50 mm On graduated slewing ring With quick release

Heavy vice for machine, 250 mm x 140 mm

Weight: ± 400 kg | Dimensions: length 570 mm, width 220 mm, height 110 mm | Maximum opening: ± 250 mm | Width of clamping jaws: 140 mm

Heavy vice for machines, 300 mm x 160 mm

• Manufacturer: WEYHERSMÜLLER

Maximum opening 300 mm Width of clamping jaws 160 mm With crank handle

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

Grinder and cutter 2 x Ø200mm FLOTT

• Manufacturer: Flott

Dimensions: Length: 520mm; Width: 250mm; Height: 270mm With suction nozzle

Steel circular sawing machine, brand TRENNJÄGER, Ø blade 280 mm

Type: VC 260, serial number: HK2145 Motor ACE, type AM90544/2, serial number 37903232; 1,1/1,4 kW, 1410/2800 rpm, 380 V 5 speeds (2 electrical and 3 via cone pulley) Cut 45° turn left-right With cooling water pum...

Vibrating motor FIEGE & JÖST, 1,1 kW

• Manufacturer: Jöst

Weight: ± 15 kg | Motor: 1,1 kW, 220/380 V, 1440 rpm

Drum motor BAUER ø215 x 965 mm

± 1 kW; 220/380 V Weight: 100 kg | Outside dimensions: 1260 mm long | Useful dimensions: 965 mm long, ø215 mm | Belt speed: 0,33 m/s

Air forging hammer, punch 34 kg

Brand; REITER, type: KB1, serial number: 870 Motor brand EP, type AS/112M, 4 kW, 380 V, 5,5 hp, 1420 rpm On a concrete support Hammer length: 95 mm, breadth: 45 mm Start manually, transmission between engine and ...