Used Machine Tools in Saxony, Germany

SANDVIK machine saw blade

• Manufacturer: Sandvik

Machine saw blade, 2 pieces SANDVIK SANDFLEX® 700 x 50 x 2.5 mm Other quantities upon request! New!

SANDVIK machine saw blade

• Manufacturer: Sandvik

Machine saw blade, 3 pieces SANDVIK SANDFLEX® 600 x 50 x 2.5 mm Other quantities available upon request! New!

WMW machine vice

• Manufacturer: WMW

Machine vice WMW , RECORD CLAMPING TOOLS Jaw width: 160 mm used, tested !

Stankoimport pusher machine

• Manufacturer: Stankoimport

Slotting machine, Slotting machine Stankoimport 7A420 (7A 420) used, tested ! Video:

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 90,0 HSS used, tested ! Diameter: Ø 90.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 482 mm | A-measure: 265 mm | Span length: 235 mm | Dimensions...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 66,0 HSS used, tested ! Diameter: Ø 66.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 427 mm | A-measure: 268 mm | Span length: 235 mm | Dimensions...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 62.0 HSS New ! Diameter: Ø 62.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 424 mm | A-measure: 264 mm | Span length: 235 mm | Dimensions ( packag...

PAGUS machine table

• Manufacturer: Pagus

Machine table PAGUS Base plate 240 x 210 mm travel range 85 mm used, tested !

PREMUS®, TOOLMENTO machine reamer

Machine reamer, 4 pieces PREMUS®, TOOLMENTO 2x PREMUS® 128200 2x TOOLMENTO 65207611 As good as new !

PAGUS machine slide

• Manufacturer: Pagus

Machine slide PAGUS with swivel bearing: inner diameter: Ø 27 mm, length: 18 mm 2x foot: 40 x 110 mm, hole spacing: 360 mm dovetail guide: width: 54 / 68 mm, height: 14 mm used, tested !

KENNAMETAL KTIP drill body

• Manufacturer: Kennametal

KTIP drill bit base body, holder for drilling/countersinking KENNAMETAL KTIP145R5SCF16M 2405281 Shank diameter: Ø 16 mm, shank length: 48 mm ( Weldon shank ) 3x drill bit modular KSEM/KTIP KTIP1450HPM Drill basic...

WMW machine vice

• Manufacturer: WMW

Machine vice WMW Back wide: 160 mm | Span: 130 mm | Dimensions: 460 x 160 x 120 mm

WMW machine vice

• Manufacturer: WMW

Machine vice WMW 160 x 180 used, tested ! Back wide: 160 mm | Back height: 47 mm | Span: 0...180 mm | Dimensions ( machine vice ): 500 x 160 x 132 mm

WMW machine vice

• Manufacturer: WMW

Machine vice WMW 160 x 100 used, tested ! Back wide: 160 mm | Back height: 65 mm | Span: 0...100 mm | Dimensions ( machine vice ): 461 x 160 x 138 mm

STANKO machine vice

• Manufacturer: Stanko

Machine vice STANKO good condition ! Back wide: 250 mm | Span: 220 mm | Back height: 70 mm | Dimensions: 650 x 300 x 180 mm