Used Machine Tools in Saitama, Japan

MSF-1300
This is a used Miyagawa Koki MSF-1300 high-speed crosscut circular saw. This is a rare machine with a crosscut saw mounted on the right side of the lifting table, making it a two-in-one machine. The table on the ...
$1,455 USD
Kumagaya, Japan
SZⅢ-10000F Rack Ruler
This is the Sinks Panel Saw SZIII-10000F with a rack ruler! It can cut up to 3m. The ruler features a floating rack ruler! A rack ruler is a right-angle ruler that is positioned by a manual rotating handle using ...
$6,548 USD
Kumagaya, Japan
MY-125X
This item is used. The condition is as shown in the photos. Pick-up is welcome. Please inspect the item in person. Operation Tested: Completed Condition: Good Product Type: Used Scratches, Scuffs, and Stains: Pre...
$728 USD
Kumagaya, Japan
1993 Amada CSW-250
- Manufacturer: Amada
- Model: CSW-250
Product name: Shearing | Main specifications: OH240010 Max. processing dimensions: Corner notch 250 x 250 mm, Edge notch max. 100 x 150 (standard 50 x 150) Max. processing thickness 3.2 mm | Machine dimensions (...
Tokigawa, Japan
1990 Amada V-400
- Manufacturer: Amada
- Model: V-400
Product name: Contour machine | Main specifications: Capacity: 250 high x 400 deep Saw blade speed: 15-19 m/m Saw blade dimensions: 3375-3535 Adjustment: 80 3-phase 200V Motor saw 1.5Kw Grinder 0.06kW
Tokigawa, Japan
2008 Morioka General-purpose vendor [LD-412].
- Manufacturer: Morioka (city)
Product name: Other sheet metal vendors | Main specifications: Universal bending machine, processing plate thickness t2.5x1220mm, mouth opening 38mm, SN:007050378
Tokigawa, Japan
1997 AMADA 2.0m hydraulic bender [RG-50
- Manufacturer: Amada
- Model: RG-50
Product name: Hydraulic bender | Main specifications: 50t×2000 DH：370
Tokigawa, Japan
2000 AMADA [2.0m hydraulic bender]FBD8020NT
- Manufacturer: Amada
- Model: FBD-8020NT
Product name: Hydraulic bender | Main specifications: NC capacity 80t, table 2000mm, stroke 150mm, upper and lower hydraulic clamps, pressure capacity 784kN, gap depth 400mm, open height 420mm, SN: 80200099, CS ...
Tokigawa, Japan
1999 AMADA [60t universal hydraulic bender] SPH-60C
- Manufacturer: Amada
- Model: SPH-60C
Product name: Hydraulic bender | Main specifications: Pressure capacity 60t Stroke length 150mm Table length 1000mm Gap depth 510mm Max. descent speed of slide 50mm/s Tank capacity 87(l)
Tokigawa, Japan
2007 Amada HFA250
- Manufacturer: Amada
- Model: HFA-250
Product name: Band saw | Main specifications: Cutting capacity: Φ250, □270×250, Blade dimensions: 27×0.9×3505
Tokigawa, Japan
2006 Amada HFA300
- Manufacturer: Amada
- Model: HFA-300
Product name: Band saw | Main specifications: Cutting capacity: Φ330, □330 x 330, Blade dimensions: 32 x 1.06 x 4115
Tokigawa, Japan
2007 Amada HFA250
- Manufacturer: Amada
- Model: HFA-250
Product name: Band saw | Main specifications: Cutting capacity: Φ250, □270×250, Blade dimensions: 27×0.9×3505
Tokigawa, Japan
2019 Nicotech SSP-400D
- Manufacturer: Nicotech
Product name: Band saw | Main specifications: OH250008 Pass line: 800 mm Angle cutting: 0°, 45° Cutting capacity: 0° Round lumber: φ320 mm Square lumber: 400 mm (W) x 280 mm (H) 45° Round lumber: φ220 mm Square ...
Tokigawa, Japan
1995 Amada HFA-400
- Manufacturer: Amada
- Model: HFA-400
Product name: Band saw | Main specifications: OT240011 Cutting capacity: Round material φ420㎜ Square material w415×H415㎜ Saw blade speed 50Hz 15～90m/min 60Hz 17～90m/min
Tokigawa, Japan
1986 Amada HA-700
- Manufacturer: Amada
- Model: HA-700
Product name: Band saw | Main specifications: Cutting capacity: Round material φ700, Square material W800 x H700, Saw blade speed 50Hz: 12-80m/min, 60Hz: 14-96m/min, Minimum clamp width 200, Chip conveyor
Tokigawa, Japan