2005 MOLLART LD2-500 Drilling Machine
used
- Manufacturer: Mollart
Weight: 3500 kg | Yom: 2005 | Min-max drilling diameter: 2-20 mm | Max drilling depth: 500 mm | Drill feed range: 0-3000 mm/min | Engine power: 5.5 kW | Extra: Counter rotating workpiece, Chip Conveyor, High Pre...
Asturias, Spain
1999 CNC Vertical Machining Center DECKEL-MAHO DMC 70V
used
- Manufacturer: Deckel / Maho
- Model: DMC 70 V
- Spindle Taper: HSK 50
Weight: approx 8.000 kg | Number of axes: 3 | Axes (x-y-z): 700x550x500 mm | Spindle speed: 30,000 rev / min | Spindle taper: HSK 50 | Workpiece weight: 600 kg | Tool table (load capacity): 900×550 mm | Total po...
Asturias, Spain
2004 CNC Horizontal Milling Machine LAGUN G Cosmos 20
used
- Manufacturer: Lagun
Weight: 10,6 tons | Table surface: 2000×700 mm | T-slots: 5x18x116 mm | Max load on the table: 4000 kg | X-course: 2000 mm | Y-course: 800 mm | Z-course: 1000 mm | Milling cone: ISO 50 | Spindle speed: 15000 rpm...
Asturias, Spain
1977 GFM SX-32 Radial Forging Machine
used
Weight: 272 tons | – no. of forging hammers: 4 | – forging pressure of each hammer: 500 Mp = 5,000 bar | – n° of strokes for each hammer: 310 strokes/min | – rated power each forging motor: 2 x 250 kW | – hydrau...
Asturias, Spain
Tip: Enter manufacturer, model or keyword