Used Boring Mills in Tokyo, Japan

Boring Rod

• Manufacturer: TOHO CHIKAKOKI

The boring rod is a hollow steel tube that transmits the rotation and feed pressure of the boring machine to the bit at the end and conducts the boring water, which is essential for boring, to the bit.

DU-4×S3 (Boring machine DU type)

Please refer to the attached PDF file for specifications. For details, please contact the Fukuoka Sales Office.

Spindle type D type

This is a compact and lightweight model. It is easy to disassemble, transport, and reassemble, and is used for all types of boring work, including survey boring, injection work, and small wells, even in small wor...

Top drive type K type

Equipped with a drill head for double-tube drilling with an inner tube rod and outer tube casing, and with a unique inner tube slide mechanism unique to the K-type, this machine is effective in drilling collapsib...

Spindle type DH type

Medium to large size models. Equipped with ample supply pressure, balancing force, and torque, they are used for foundation piles, landslide control piles, and well boring. A hydraulic chuck is standard equipment...

Low head type DW type

This boring machine is designed with a low swivel head height and is equipped with a hydraulic chuck as standard equipment, enabling safe and speedy rod loading and unloading operations. The small models are effe...

Spindle type DU type

This medium to large size model has 6 forward and 2 reverse spindle speeds by switching between high and low gears. It excels in deep drilling such as deep well drilling, hot spring drilling, and exploratory surv...

����������������������������������RE2-1450

• Manufacturer: (株)大矢ラジアル

穴径：φ52 32～1655rpm　MT-5　3.7kW　主軸行程：300 ベース～主軸端までの距離：330～1315mm

1990 ����������������������������������RH-1300

������������������������������������RH-1300 ��������������������� 2050x900x200������������ 2440��� ������ MT5������������ 50Hz 33���1610���60Hz 40���2010 ������������������������������������������������������...

1983 TOSHIBA TSS-20/40A

• Manufacturer: Toshiba
• Model: TSS20/40A

φ4000　T：φ2000　X-1740 Z-1000　4 jaw chuck Cross-1650㎜ Work height：2200㎜　Table～Arm: 2390mm Ram tilt abgle-30° 3.2～100rpm　Table load:16t Rotation force: 4500Kgf-m Cutting force: 3000Kg Main motor: 37Kw4P

1985 TOSHIBA TXN-13

• Manufacturer: Toshiba
• Model: TXN13

FANUC-11T　φ1400×1000ｈ　ATC-12 4 jaw chuck φ1250×2APC 3.2～315rpm Load: 5000Kg Rotation force:1350Kg-m X-1230　Z-900　Cross-1000mm Tool bite□32 Chip conveyor

1996 TOSHIBA TD-40/ 65S

• Manufacturer: Toshiba
• Model: TD40/65S

φ6500　T:φ4000　4jaw chuck 0.8～40rpm（18steps）　AC75Kw(Invertor) Table load：50ｔ　Rotation force: 16ｔ・m Table to under cross rail: 4000mm Square Ram stroke: 1600(Vertical) Ram right & left angle: 30°　Slant cutting angl...

TOSHIBA Table type horizontal medium grill

• Manufacturer: Toshiba
• Model: BZ8

Table size: T)1050×900 | Spindle diameter (φ): 80mm dia. | Specifications / included: With XY Digi | Spindle taper: MT-05 | Stroke(x,y,s): S)X1000,Y800,Z700 | Spindle stroke: SS)400 | Main shaft rpm / step: 27-1...

Kyoritsu Seiki Micro Boring

• Manufacturer: Seiki

Taper no: NT-40 | New / used: second hand | Number: Complete set

Kyoritsu Seiki Micro Boring

• Manufacturer: Seiki
• Model: MB

Taper no: NT-40 | New / used: second hand | Specification etc.: Old model | Number: Complete set