Used Bending & Forming in Lombardy, Italy

2001 BPR CPD 80

• Manufacturer: BPR

Typology: Sheet metal processing | Diam. of trees: 80 mm | Standard roller diam.: 290 mm | Speed of trees: 6 g/1' | No. of driving rollers: 3 | Engine: 4 kw | Ce machine: v | Encumbrances: 970x1385x1280 mm | Wei...

G.B.C. SPECIAL ALIGNMENT CLAMPS

• Manufacturer: GBC

Description Internal And External Locking Pipe Clamps For Aligning Pipes And Flanges SPECIAL ALIGNMENT CLAMPS.fusion-fullwidth.fusion-builder-row-3-5 a:not(.fusion-button):not(.fusion-builder-module-control):not(...

1995 BLM PLAUNO

• Manufacturer: BLM

Typology: Sheet metal processing | Fe pipe bending capacity ( 35 kg/mm²): Ø min. 3.5×0.7 mm - Ø max. 12×1.5 mm | Cu-al-ot annealed tube bending capacity: Ø max. 16×1.5 mm | Wire bending capacity ( r=35 kg/mm²): ...

G.B.C. SUPERBOILER T5 FLANGE

• Manufacturer: GBC

Range flange Ø min. 65 max. 400 mm (2,56″ – 15,75″) Description Flange facing machine SUPERBOILER T5 FLANGE Range flange Ø min. 65 max. 400 mm (2,56″ – 15,75″).fusion-fullwidth.fusion-builder-row-6 a:not(.fusion-...

Press for sheet metal stamping.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

PRESSES FOR BENDING PLATE.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

PRESS SUITABLE FOR MOLDING AND SHEET BENDING.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

Sheet metal bending machine 1016 mm

The 1016 mm Sheet Metal Bender is a highly effective tool that bends mild metal sheets up to 1.2 mm thick, with a maximum bending angle of 120°. A must-have for any workshop. Sold with a stand. Features – Maximum...

PRESS MOBILE SLIDING RAIL EXECUTION THE FIRST BENDING PIPE.

- DIAMETER BETWEEN 219.1 mm. and 1219.2 mm. - THICKNESS up to: INOX 55 mm. - DUPLEX 45 mm. - SUPER-DUPLEX 35 mm. - LENGTH up to 12 mt. - Mast sliding complete with n° 6 hydraulic cylinders that allow you to close...

Swan neck press for machining large pieces.

• Manufacturer: Swan

Lower floor - machining / Slots for T-nuts upon customer request Moving table - machining / Slots for T-nuts upon customer request Installed power 14 KW Main cylinder thrust force 200 Tons Horizontal cylinder mov...

Mobile piston press for processing medium/large sized pieces.

Lower floor - machining / Slots for T-nuts upon customer request Moving table - machining / Slots for T-nuts upon customer request Installed power 14 KW Main cylinder thrust force 200 Tons Horizontal cylinder mov...

Burr cutting press.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

RESSES FOR BENCH STRAIGHTENING.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

PRESS FOR SHEET 200 tonn.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

THIS CUSTOMER WORKS IN THE FIELD OF CONSTRUCTION OF METAL FITTINGS INTENDED FOR THE NAVAL / BUILDING / CIVIL SECTOR. "4-COLUMN" PRESS SUITABLE FOR MOLDING OF LOW-DRAWING SHEETS

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...