Used Bending & Forming in Lombardy, Italy

Faccin Calandra 3 Rulli 3HEL

• Manufacturer: Faccin-Biko
• Model: 3HEL

Standard equipment: Linear guides for roller movement (RGS) 4 independent lower roller support bearings (MCS) Double-width bearing seats (WHS) Electronic synchronization of roller parallelism (EPS) Induction-hard...

2006 FACCIN MA 50 Manipulator for dishing press

• Manufacturer: Faccin-Biko

Max. blank Diameter mm 5.000 Min. blank Diameter mm 1.500 Max. capacity kg 7.000 Total power installed HP 25 Blank rotation speed m/min. 25 Up-down speed for support arms m/min. 12 Voltage V 380 Fre...

1977 Ducci 3-rolls 3000x20mm

• Manufacturer: Faccin S.R.L.

Rolling capacity: 3000x20mm Top roll diameter 370 mm Side rolls dia. 330 mm Power installed 30 KW Machine is available with: - Hydraulic controls with digital readouts

1991 Stolting 4 rolls 3000x21mm

• Manufacturer: Faccin S.R.L.

Working length 3000 mm Calendering capacity 21 mm Capacity invitation 19 mm roll diameter exceeding 420 mm 330 mm diameter lower rollers installed power 22 KW 21,000 Weight Kg The machine is equip...

2001 BPR CPD 80

• Manufacturer: BPR

Typology: Sheet metal processing | Diam. of trees: 80 mm | Standard roller diam.: 290 mm | Speed of trees: 6 g/1' | No. of driving rollers: 3 | Engine: 4 kw | Ce machine: v | Encumbrances: 970x1385x1280 mm | Wei...

2023 COMAC S1

• Manufacturer: Comac

Typology: Sheet metal processing | Diam. of trees: 35 mm | Standard roller diam.: 135 mm | Speed of trees: 4.2 mm/min | No. of driving rollers: Only upper | Flat bending capacity: 50 x 8 mm | Round bending capac...

EURING CURVATRICI CM 2000 TOP2

• Manufacturer: EURING CURVATRICI

Typology: Sheet metal processing | Diam. of trees: mm. 30 | Standard roller diam.: mm. 117-148 | No. of driving rollers: 2 | Weight: ≈ kg 170

G.B.C. SPECIAL ALIGNMENT CLAMPS

• Manufacturer: GBC

Description Internal And External Locking Pipe Clamps For Aligning Pipes And Flanges SPECIAL ALIGNMENT CLAMPS.fusion-fullwidth.fusion-builder-row-3-5 a:not(.fusion-button):not(.fusion-builder-module-control):not(...

1995 BLM PLAUNO

• Manufacturer: BLM

Typology: Sheet metal processing | Fe pipe bending capacity ( 35 kg/mm²): Ø min. 3.5×0.7 mm - Ø max. 12×1.5 mm | Cu-al-ot annealed tube bending capacity: Ø max. 16×1.5 mm | Wire bending capacity ( r=35 kg/mm²): ...

G.B.C. SUPERBOILER T5 FLANGE

• Manufacturer: GBC

Range flange Ø min. 65 max. 400 mm (2,56″ – 15,75″) Description Flange facing machine SUPERBOILER T5 FLANGE Range flange Ø min. 65 max. 400 mm (2,56″ – 15,75″).fusion-fullwidth.fusion-builder-row-6 a:not(.fusion-...

Press for sheet metal stamping.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

PRESSES FOR BENDING PLATE.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

PRESS SUITABLE FOR MOLDING AND SHEET BENDING.

Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...

Sheet metal bending machine 1016 mm

The 1016 mm Sheet Metal Bender is a highly effective tool that bends mild metal sheets up to 1.2 mm thick, with a maximum bending angle of 120°. A must-have for any workshop. Sold with a stand. Features – Maximum...

PRESS MOBILE SLIDING RAIL EXECUTION THE FIRST BENDING PIPE.

- DIAMETER BETWEEN 219.1 mm. and 1219.2 mm. - THICKNESS up to: INOX 55 mm. - DUPLEX 45 mm. - SUPER-DUPLEX 35 mm. - LENGTH up to 12 mt. - Mast sliding complete with n° 6 hydraulic cylinders that allow you to close...