- Trusted Seller
PS50 Shearfeed Systems
- Manufacturer: Automec
The operator loads a blank onto PS 50, locks the parts in place with pneumatic grippers, and sets the feed in motion which automatically triggers a shear, punch or stamping machine. PS 50 advances the material to...
Waltham, MA Edge Tech. FMB Turbo 2-20 Magazine Servo Bar Feeder 6'L 2mm-20mm Cap.
- Manufacturer: FMB
Machine No: 18-301261 R:1572765 Bar Feeder was purchased new for $22k by seller. They put it on a machine in an R&D project and ran it for about 100 hours and removed it from the machine. Bar feeder is in like ...
Watertown, CTKitagawa 6" Power Chuck BB206 P-139
- Manufacturer: Kitagawa
“Probably NEW” Kitagawa 6" Power Chuck BB206 Drawtube Chuck to 24 x 1.5 Plain Back Probably NEW
$949 USDBay Shore, NY- Trusted Seller
2019 LNS GT326-E Magazine-type Bar Feed
- Manufacturer: LNS
Bar length capacity.: 12' | Bar diameter capacity: 0.125″ – 0.787" (3 – 20 mm) | Set-up time (partial/full): 2/8 min | Air pressure: 90 - 100 psi | Rack capacity: 10.6″ wide | Hydraulic oil (iso 100): 7.4 US gal...
Massachusetts, USA - Trusted Seller
2018 LNS GT326-E Magazine-type Bar Feed
- Manufacturer: LNS
Bar length capacity.: 12' | Bar diameter capacity: 0.125″ – 0.787" (3 – 20 mm) | Set-up time (partial/full): 2/8 min | Air pressure: 90 - 100 psi | Rack capacity: 10.6″ wide | Hydraulic oil (iso 100): 7.4 US gal...
Massachusetts, USA - Trusted Seller
2018 LNS GT326-E Magazine-type Bar Feed
- Manufacturer: LNS
Bar length capacity.: 12' | Bar diameter capacity: 0.125″ – 0.787" (3 – 20 mm) | Set-up time (partial/full): 2/8 min | Air pressure: 90 - 100 psi | Rack capacity: 10.6″ wide | Hydraulic oil (iso 100): 7.4 US gal...
Massachusetts, USA - Trusted Seller
LNS 332 Hydrobar Express
Bar length capacity.: 12' | Bar diameter capacity: 0.125″ – 1.250" (32mm) | Bar feed z-axis retract: 20″ | Min. bar length capacity: 27.6″ | Hydraulic oil: 21 US gal | Loading cycle: 35 – 40 sec | Min. remnant l...
Massachusetts, USA - Trusted Seller
$2,400 USDMinneapolis, MN - Trusted Seller
$1,900 USDMinneapolis, MN - Trusted Seller
LNS Quick Load 4' Bar Feeder
- Manufacturer: QuickLoad
Type Quick-Load, S# 18891, Air operated lift cylinders, 24v Auto/Manual control, 4'L x 3' 2.5" Stock holding rack, 55" Stock catch V feed tray, Manual adjustment of stop on slide bar, Overall Dim. 6' 6"L x 4' 6"W...
$1,100 USDMinneapolis, MN 
Asahi Seiki TP-45/ US Baird 4-37 Single Row Cut 5"Diameter Roll Feeder
- Manufacturer: U.S. Baird
Front Feed Strip Lube Sponge Tray Feed Rod Asset Removed From Press In Full Operational Condition Instock And Available Immediately Front Feed Strip Lube Sponge Tray Feed Rod Asset Removed From Press In Full Oper...
Watertown, CT
Dimac Asahi Seiki TP65/US Baird 551 Oscillating 1 Or 2 Row Cut 6.5"Roll Feeder
- Manufacturer: Dimac
Dimac Asahi Seiki TP65/ US Baird 551 Oscillating 1 Or 2 Row Cut 6.5" Roll Feeder Chain Driven Off Bottom Shaft Dimac Roll Feed Set Up Feed Bottom Shaft Adjustment Wheel & Rod Asset Removed From Press In Full Oper...
Watertown, CT- Trusted Seller
2018 LNS GT326-E Magazine-type Bar Feed
- Manufacturer: LNS
Bar length capacity.: 12' | Bar diameter capacity: 0.125″ – 0.787" (3 – 20 mm) | Set-up time (partial/full): 2/8 min | Air pressure: 90 - 100 psi | Rack capacity: 10.6″ wide | Hydraulic oil (iso 100): 7.4 US gal...
Massachusetts, USA - Trusted Seller
LNS Eco Load-L Magazine Type Bar Feed
- Manufacturer: LNS
Bar capacity: 0.197" – 2.56" | Max. bar length: 59" | Spindle height: 33.5" – 49" | Electrics: . 2Ph/50/60/200/220/24v control | Dimensions (approx.): 83"W x 72"D x 60"H | Weight (approx.: 528 lb
Massachusetts, USA - Trusted Seller
2011 MTA Eagle 551-6 Magazine Bar Loader
- Manufacturer: MTA
- Model: Eagle 551-6
Channel guides for bars from 5mm - 25mm. Min./max. bar capicity: 5/51 mm (0.2" - 2") | Max. bar length: 72" | Magazine capacity (@ 3/4" diam.): 12 bars | Wired for: 240v | Dimensions (approx.): 95"L x 20"W x 60"H...
Massachusetts, USA
Tip: Enter manufacturer, model or keyword
