Used Agitators, Blenders, Mixers in Germany

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

remarks: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (s...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...

1080 liter stainless steel 316 agitator tank with beam agitator

• Manufacturer: Diessel

max. allowable working temperature: 100 °C remarks: Cone height approx. 520 mm; spout with flange-mounted reduction fitting (reduced to 25 mm; end piece probably made of brass)

17620 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: AURICH Edelstahl GmbH

max. allowable working temperature: 95 °C remarks: Manhole diameter approx. 510 mm; height-adjustable screws of the feet are no longer present; 1 small pressure point in the insulation jacket

10000 liter horizontal agitator tank; Aisi304 with propeller agitator

Volume: 10.000 liter | Stand type: legs | Quantity legs: 4 Piece | Insulation: available | Insulating jacket: hermetically welded | Diameter inside: 2.000 mm | Diameter outside: 2.100 mm | Cylindrical length: 32...

300 liter agitator tank with cross blade agitator; Aisi 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

160 Liter isolated agitator tank with propeller agitator, Aisi 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

1700 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Connections to the heating coils around the cylinder and the lower bottom were partially welded shut by the previous operator; we suspect that the heating coils are no longer functional

5000 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Diessel

Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate notice: bump at the insulation jacket, scratches inside, Functionality of the double jacket not checked remarks: Sheet met...

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

261 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: Heinrich Nowak

remarks: Diameter of hand hole approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; take this into account when setting up the vessel) EX-proof: motor is ex-proof (compliance with the ne...

67000 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: BERTSCH

max. allowable working temperature: 100 °C remarks: Manhole cylinder NW 600; total height might deviate slightly (measures taken from drawing)