Used Agitators, Blenders, Mixers in Germany

500 liter agitator tank, Aisi 304 with disc agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

technical equipment: level indicator (without guarantee), butterfly valve EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

2500 liter agitator tank, Aisi 304 with propeller agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

125000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Bartec Schwarte

remarks: Manhole cylinder 510/410 mm; cylinder wall thickness: lowest segment: 4 mm; 3 subsequent segments: 3 mm; top 3 segments: 2.5 mm

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

4500 liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Apparate- und Behältertechnik Harrislee

remarks: Foot ends cut off; Screws in agitator flange cut off; Manhole cover fixing screw missing (see photos) agitator features: According to the previous owner, the agitator is defective and needs to be repaired.

10000 liter agitator tank with inclined blade agitator, Aisi 304

agitator features: Agitator arranged eccentrically on a welded crossbar

1300 liter pharmacy agitator tank, Aisi 316 with dissolver agitator

• Manufacturer: H&K Behälter- und Edelstahltechnik

agitator features: There is also 1 propeller on the agitator shaft (see photos)

200 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: URBAN

agitator features: Drehzahlregelung über Frequenzumrichter (siehe Fotos)

3500 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket remarks: Smaller dents on feet and outlet; ...

4500 liter coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out o...

THOUET agitator tank - type RW-3000, with a capacity of approx. 3,000 kg.

• Manufacturer: Thouet

The tank is double-walled for heating in mild steel. The hot water is provided by the installed screw-in heaters. Useful capacity: approx. 3,000 kg