Used Agitators, Blenders, Mixers

Gemco 3 Cu Ft slant cone blender

• Manufacturer: Gemco

Gemco 3 Cu Ft slant cone blender - Stainless steel - Maximum material density: 150 lbs/Cu Ft - On legs - 1 HP motor - Serial #B-55539

Mepaco Model: 170 - 4000lb Capacity Mixer-Blender w/Dual Paddle Agitators

• Manufacturer: Mepaco

Unit is USED and in very good condition. Unit shows signs of some visible minor surface wear, scratching on the outside, otherwise not affecting intended use of the unit. What you see in the picture is what is in...

Globe Pharma model MBIV Maxiblend 16 quart V blender

• Manufacturer: Globe Pharma

Globe Pharma model MBIV Maxiblend 16 quart V blender - Stainless steel - 1.5 HP, 3 phase, 60 cycles, 115 volts - Serial # 031733078G - Manufactured in 2017

40 Cubic Foot Vertical Auger Mixer Blender

All carbon steel construction. 48"Ø mixing hopper fixed to elevated stand. 12"Ø auger powered by 5HP gearmotor (requires 230/460VAC, 60Hz, 3 phase). Demonstration video available. Overall dimensions: 75"x75"x1...

Rietz 75 cu. Ft. Stainless Steel Double Ribbon Dual Agitator Blender

• Manufacturer: Reitz

Reitz Jacketed Stainless Steel Double Ribbon Dual Agitator Blender Model No: RDS-28-K3406 Serial No: RDS-780049 Jacket and Screws Rated for 14.9 PSIG Metal Thickness: Trough - .1875, Jacket - .1875, Head - .375 (...

Mixer/ Agitator (Bolt-on type)

Mixer/ Agitator. (Bolt-on type) (2) Each. Motors are 1/2 HP, 1750 RPM, 230/460 volt. Motors go into gearbox (not sure output speed) Stainless Steel shaft approx. 29" with 14" Dia. mixing blades.

30 Cubic Foot Stainless Steel Ribbon Blender Mixer

Approx 36" diameter mixing chamber x 67" long. Size (cubic feet): 30

ServoLift Bin Blender

• Manufacturer: Servolift

ServoLift Bin Blender Used ServoLift Bin Blender, SN #13114. For use with 1530 Liter flo-bins.

Stainless Steel Horizontal Paddle Mixer Blender 35 Cu/Ft

Stainless steel mixing chamber measures 30"W X 78"L X 35"D. Overall dimensions: 110" L x 62" W x 70" H. Weight = 2,056 lbs.

JH Day Stainless Steel Double Ribbon Mixer Blender – 35 Cu/Ft

• Manufacturer: J. H. Day Company, Inc.

Stainless steel blending chamber with a sanitary finish on internal surfaces. Blender is constructed with a carbon steel outer shell and a 304 stainless steel unitary lining. Blender Dimensions: 30"W X 78"L X 33"...

15HP Mild Steel Paddle Blender Mixer - 40 Cu/Ft

U-trough paddle mixer with welded mild steel construction Mixing chamber is 42"W X 48"L with a total depth of 53" Horizontal shaft, 4- center pitched paddles with curved edge Bolted, stainless steel top cover wit...

1 HP Mixer/Agitator with Stainless Steel Shaft

used 1 HP Mixer/Agitator with Stainless Steel Shaft. 230/460 volt, 1725 RPM. Bridge mount (4' L x 1' W) or remove and mount on flange. Stainless Steel Shaft is 3/4" diameter x 4'L with (2) prop type blades appr...

Agitator with Shaft

Agitator with Shaft Used agitator, with s/s shaft, with motor, as is.

115 cu. Ft Food Processing Equipment FPEC Stainless Paddle Blender Mixer

• Manufacturer: Food Processing Equipment

Model 814. s/n 1599 double shaft paddle blender, all stainless, internal blending chamber dimensions: 66" wide x 108" long x 40" deep to radius bottom, pneumatic operated cover lid, hydraulic drives. Bottom end ...

J.H. Day Stainless Steel Paddle Blender Mixer 6 Cu/Ft

• Manufacturer: J. H. Day Company, Inc.

Polished stainless steel material contact surfaces. Mixing chamber dimensions: 17" W X 38" L X 18.5" D. Blender shaft ends supported on pillow block bearings with packing gland seals. Hinged flat top cover with g...