Used Sheet Metal Processing in Saxony, Germany

1994 TWM Faber RE-Mat 145

• Manufacturer: Faber

Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1....

Weingarten UAH 80 + UR 80.5

• Manufacturer: Weingarten

Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjusta...

1993 TRANSFLUID DB618

• Manufacturer: Transfluid

Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single...

1988 WMW -

• Manufacturer: WMW

-application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box an...

2006 Schilt Engineering BV SBC 60 SP (PLC)

• Manufacturer: Schilt Engineering BV

Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control...

1985 GOTI S.A. CE 200 TN

• Manufacturer: GOTI S.A.

description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable

1974 RASTER HR 30 SL

• Manufacturer: Raster
• Model: HR 30 SL

Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm

Feed units VG 400

Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described.

1990 ANTRIM HYDRAULICS Embosing Press

• Manufacturer: ANTRIM HYDRAULICS

Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x3...

Weingarten UZH 80

• Manufacturer: Weingarten

This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...

1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

• Manufacturer: VEB ELEKTROTECH.GERAETE

Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

1970 straightening machine DDR BETRIEB nicht bekannt

• Manufacturer: DDR BETRIEB

straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

1981 Strojarne Piesok XZP 100/12

• Manufacturer: ESPE/Piesok
• Model: XZP 10012

The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjuste...

1980 NICHT BEKANNT 23N/8

• Manufacturer: NICHT BEKANNT

Punching Press Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Punching cross section in mm²: 45 kp/mm² | Table-size: 120x100 mm | Throat: 80 mm | Weight...

2001 TRUMPF-PULZER MR65R

• Manufacturer: Trumpf

It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrou...