Used Processing in Germany

almond halving machine PEHA - approx. 600 mm working width, YOM 1983.

• Manufacturer: Peha

The machine is suitable for cutting almonds and similar nuts into halves. The machine is equipped with a cutting knife and two rubber rolls.

Almond sticks machine PEHA, Germany - type H1-04-600 with approx. 600 mm working width.

• Manufacturer: Peha

The almonds are fed into the hopper and go into the slicing system by a stepless vibrator with feeding channels. In the slicing system, the product is cut into sticks by using two knife shafts. Production capacit...

1961 BÜNDGENS UD2

• Manufacturer: BÜNDGENS

Info: double wire processing | Cutting length: 1000 mm | Diameter range: 0,8-2 mm | Speed – meters/min: 80

2018 Vernet-Behringer MAG EVO 420 Cutting and Drilling System Panel Processing Center

• Manufacturer: Vernet Behringer

Cutting and Drilling System Panel Machining Center CNC Control Kjellberg HiFocus 360 Power Source Automatic Turret (750 x 400 mm with limitations) Infeed Side: Zeroing Cross Conveyor NC Feed Carriage, Laterally P...

laboratory centrifuge HEREOS - type.400

• Manufacturer: HEREOS

Automation & Sample Processing

Automation & Sample Processing Labor automation and sample processing equipment supporting standardized and high-throughput laboratory workflows. The offering includes automated liquid handling and core processin...

2x WEBER DS 88 - 17D complete original process units

• Manufacturer: Weber

Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - enlarged preheating zone - all parts unused in original packing ...

mobile stainless steel trolley - with sheets and gates

Hinged lid with spraying lip for SDE 550 litres

Ystral jet stream mixer, Aisi 304

• Manufacturer: Ystral

Other: Agitator incomplete Rotor (propeller) missing Top stator diameter approx. 350 mm Bottom stator diameter approx. 300 mm

Ystral jet stream mixer, Aisi 304

• Manufacturer: Ystral

Other: Clamping device, (Aisi 304 Specified shaft length from the lower half of the flange coupling to the end of the stator Top stator diameter approx. 310 mm Bottom stator diameter approx. 250 mm Total length a...

REMS Lot Threading Machines

• Manufacturer: Rems

consisting of an electric tapping clout and a manual Cutting range: from 1/2 inch to 1 1/2 inch for the electric and 1/4 to 2 inch for the manual cutting

LANCO INTEGRATED - OKUMAT 160-1 - 2020 - Assembly system for keyboards

• Manufacturer: Lanco

🔧 Main technical data • Manufacturer: Lanco Integrated GmbH & Co. KG • System type: Rotary indexing table automatic assembly system • Project/Model: “Plug Viola” • Cycle rate: at least 45 cycles/min • Two-lane bo...