New Cnc Lathes in Lombardy, Italy

2025 ECOCA SJ 20 MC

• Manufacturer: Ecoca

2025 ECOCA SJ 20

• Manufacturer: Ecoca

Cnc:: FANUC Series 0i-TF PLUS | Max. workable diameter from recovery: 225 mm | Max. workable length: 235 mm | Z axis travel: 325 mm | X axis travel: 142 mm | Main spindle speed max.: 6000 rpm (belt drive) | Main...

RIMEX 660 CNC; RIMEX 760 CNC; RIMEX 860 CNC

CNC System and servo drives available also: Heidenhain;Fanuc;Fagor

RIMEX 800 CNC; RIMEX 1000 CNC; RIMEX 1250 CNC

• Spindle bore: 155 millimeter

CNC System and servo drives available also: Heidenhain;Fanuc;Fagor

RIMEX 560 CNC; RIMEX 660 CNC; RIMEX 760 CNC

Height of centers: 280 | 330 | 380 mm | Swing over bed: 560 | 660 | 760 mm | Swing over cross slide: 280 | 380 | 480 mm | Width of bed: 460 | 460 | 460 mm | Distance between centers: 1500; 2000; 3000; 4000 mm | ...

RIMEX 510 CNC; RIMEX 560 CNC; RIMEX 660 CNC

Height of centers: 255 | 280 | 330 mm | Swing over bed: 510 | 560 | 660 mm | Swing over cross slide: 330 | 360 | 460 mm | Width of bed: 400 | 400 | 400 mm | Distance between centers: 1000; 1500; 2000; 2500; 3000...

RIMEX 870 CNC; RIMEX 970 CNC; RIMEX 1070 CNC

Height of centers: 435 | 485 | 535 mm | Swing over bed: 870 | 970 | 1070 mm | Swing over cross slide: 510 | 610 | 710 mm | Width of bed: 560 | 560 | 560 mm | Distance between centers: 2000; 3000; 4000; 5000; 600...

RIMEX10T.10 CNC; RIMEX12T.12 CNC

• Manufacturer: ZMM

CNC System and servo drives available also: Heidenhain;Fanuc;Fagor

RIMEX 400CNC

• Spindle bore: 54 millimeter

Height of centers: 203 mm | Swing over bed: 406 mm | Swing over cross slide: 168 mm | Width of bed: 400 mm | Distanza tra le punte/ distance between centers: 1000 mm | Two automatic changed sub-ranges or steples...

T4-ZZ MULTI-OPERATION MACHINE

• Manufacturer: Record

Intesting and internal chamfering of curved tube ends Electromechanical rotary table 2 workstations 4 independent NC working units

PADE duet

• Manufacturer: Pade

The two heads can operate simultaneously on the same workpiece, dividing the number of operations to be performed. Equipped with 2 work tables, for hanging cycle, and equipped with automatic loaders and unloaders...

Teach-in CNC lathes TL280/300 range

The teach-in lathes range is conceived to ease and optimize the work’s capacity of the traditional single pulley lathes operators in the machining of small and medial series of pieces From the mechanical point of...

Teach-in CNC lathe TL350/400 range

Torgim TL 350/400 lathe is a machine for high cutting depth, it’s a perfect one to work forged pieces and very hard materials. Headstock: The head, melted in special stabilized Meehanite cast-iron, is steadily fi...

Teach-in CNC lathe TL450/500 range

This lathes range has for standard an automatic speed gear range, 30 Kw spindle motor and a swarfs conveyor. It’a a machine for high cutting depth, it’s a perfect one to work forged pieces and very hard materials...

Flexible turning machine MBT300

• Manufacturer: Torgim Di Giana Paolo & C. Snc

The machine TORGIM MBT300 allows to unload finished pieces with maximum Ø 105 mm and length 300 mm starting from the rough bar. To reach these results we have used the most modern productive technologies trying t...