Used Glass Equipment in Hungary

Novex Printer

Processing BAZ-1 5000x2700mm

Base IG 25/20 STEP TILT

PKL (2005), ESL-RS Float (2014), ESL-RSS VB33 (2002/2011)

IG Line 3500x2500mm year 2008/2006

BASE CUT - 37/26 TILT

Washer HWM-A26/6

Base Cut -37/26 Belt

2005 GLASS BENDING AND CURVING OVEN EG6032-31

Used glass bending and embossing furnace. The internal dimensions of the machine are 1400x1000x250mm. In the normal condition shown in the pictures, it can be taken away immediately and used.

2020 Glastronic MG WRS

• Manufacturer: Glastronic

Water softener is suitable for total clean glass washing. On the flat glass washed with hard water, after drying, the minerals present in the water precipitate, small impurities appear, so the spotless purity of ...

2008 Lisec Schraml Topclear 1600

• Manufacturer: LiSEC

Glass washing machine manufactured by Schraml Austria, suitable for washing glass with a maximum height of 1600 mm. The path og the glass is open at the top, so it is suitable for washing glass of almost any heig...

2010 Glastronic MGHP1600

• Manufacturer: Glastronic

Semi-automatic insulated glass production line. Maximum pressable glass height 1600mm. The washing machine is also suitable for washing 4-brush, low-e layered glass. If required, with gas filling unit at the end ...

2009 Szilank Glasswasher 2100

• Manufacturer: Szilank

Glass washing machine manufactured by Szilánk, suitable for washing glass with a maximum height of 2100 mm. The path og the glass is open at the top, so it is suitable for washing glass of almost any height. Prof...

2004 PolyGlass –

• Manufacturer: Polyglass

1600 mm high, Polyglass brand insulated glass production line, with roll press. Open top washing machine with 4 brushes for low-e glass also. End of the line outlet conveyor with sop sensor. – Heated washing tank...

2004 Glastronic (Germany) MG CUT1

• Manufacturer: Glastronic (Germany)

MG CUT type, semi-jumbo glass size semi-automatic glass cutting table. The table top is pneumatically tilted. The cross-cutting head is motor-driven, the longitudinal cut is fitted with a ribbed belt, crank solut...