Used Evaporators

Wiped/Thin Film Evaporator Stainless Steel 304 - IPP# 704959

• Manufacturer: Balfour

wiped film lab size evaporator system. jacket 13.8 bar @ 200 degrees C. Consisting of (1) 2.5 square feet 304 stainless steel vertical jacketed wiped/thin film evaporator. with 304 stainless steel jacket. 4-blade...

Evaporator Rising/Falling Film Two Effect Stainless Steel 304 - IPP# 216076

double effect evaporation system. See video of system operating at Capacity based on a brine stream at 24% to 50% strength. Feedstock of 32,000 lbs/hr(normal operating) or up to 50,000 lbs./hr. brine at ~ 20-25% ...

Stainless Steel 316 Rising/Falling Film Evaporator - IPP# 220739

• Manufacturer: Buflovak/Blaw Knox

tubular evaporation system manufactured by Buflovak-Blaw-Knox. Includes 5 main pieces and support equipment such as pumps and small plate heat exchanger. Main pieces are as follows:(D) 1st effect steam chest (hea...

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 70252

• Manufacturer: Luwa

3 sections jacket rated by 10bar @ 200 degrees C ( total volume 150liter).

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220585

• Manufacturer: Pitton-Gessner/Germany

1.4571/H2 falling film rated -1/3 @ 200 ° C bar, 640 l tubes, -1/9bar@ 250 ° C, 610 l shell, dia 600 mm,2 stainless steel heads

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220581

• Manufacturer: Kleiser Gmbh

both sides , 4.685 l internal, 1.100 l jacket total height 8.550 mm

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 205459

• Manufacturer: Pope Scientific

Wiped-Film Molecular (Short-Path) Still 2 to 50 liters/hour. Electrically heated with slotted glass filled Teflon wipers on rotor. Mechanical seal on shaft. With high vacuum pump.

Hastelloy - C22 Clad Wiped/Thin Film Evaporator - IPP# 220954

• Manufacturer: SMS Buss

with 316 SS rotor, Jacket rated for 218 psi at 482 degrees F. Heating surface area 150.7 Sq. Ft., Serial numbers: Lower Body Serial Number 1400/56, National Board Number 717; Interm body Serial Number 1400/56, Na...

Stainless Steel 316 Hitachi Wiped/Thin Film Evaporator - IPP# 74896

• Manufacturer: Hitachi

jkt rated 125 psi @ 350 deg F 2-zone CS jkt. 10' long evaporation section. 8-blade rotor, mech seal on shaft. Belt driven by 30 HP, 3/60/460 volt, 890 rpm TEFC motor.

Stainless Steel 316L Pfaudler Wiped/Thin Film Evaporator - IPP# 233717

• Manufacturer: Pfaudler

wiped film evaporator system. Jacket rated for 160 psi at 650 degrees F. Drive system by Pfaudler, 3 DTW With 158 Sq.Ft. external condenser, 316 SS tubes 316 SS tube sheet 316 SS heads CS shell NB # 43399 Shell s...

Stainless Steel 316 Rodney Hunt Wiped/Thin Film Evaporator - IPP# 116939

• Manufacturer: Rodney Hunt

Turbo-film evaporator CS jacket jacket rated 150 psi @ 400 degree F. with 16" cone bottom. Unit driven by 15 HP, 3/6/440 volt, 1760 rpm motor. Rotor speed 690 rpm. Includes:134 Sq Ft, 10" diameter x 8' long 304 S...

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O

• Manufacturer: Organomation

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O is a reliable solution for efficient nitrogen evaporation in the lab. This model is ideal for laboratories nee...

Zymark TurboVap LV Evaporator

• Manufacturer: Zymark

The Zymark TurboVap LV Concentration Evaporator, P/N 43750, is a workstation that provides simultaneous evaporation of up to (50) 15mL centrifuge tubes, offering many interchangeable tube racks which gives you th...

Stainless Steel 316 Artisan Wiped/Thin Film Evaporator - IPP# 91223

• Manufacturer: Artisan

hot oil jacket rated 30 psi/full vacuum @ 450 deg F. Driven by 7.5 HP, 3/60/230/460 volt, 1750 rpm motor. With 3 HP, 3/60/230/460 volt, 1750 rpm rotary gear pump.