Used Processing in New Jersey, USA

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221284

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221281

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange Requires 2....

IPP# 602139, Urea Prill Fertilizer and Agrochemical

Chemico Design – Conventional 1000 STPD Nameplate CO2 Compression – Centrifugal followed by reciprocating Urea Reactor – Unocal/Stamicarbon conventional design (1992) Urea Concentration – Crystallization, Crystal...

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: GEA

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Sterilizer - IPP# 207687

Designed for pass thru loading and unloading, with quick open doors front and back. Original Installation to a clean room 316 SS lined chamber Modified and re-rated in 1993 by Industrial Fabricating and Engineeri...

Tubular Reactor Stainless Steel 316 - IPP# 232538

• Manufacturer: Snowtech Hydro Cracker & Fisher Tropsch

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...

Stainless Steel 316L Centrifuge-Lab - IPP# 239308

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Stainless Steel 316L Centrifuge-Lab - IPP# 239307

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert The system offers these advantages Single use, rapid changeover dispo...

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel - IPP# 220241

• Manufacturer: Alfa Laval

manufacturers #881150-02-S-03-SK-02-0259 feed density 1110 kg/cm3 sediment density 1251 kg/cm3 control fluid density 1000 kg/cm3 process temperature 0-100 deg C 438mm diameter bowl Swep 316 s/steel (1.4401) plate...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233810

• Manufacturer: Rieter

Type: Underwater strand pelletizing system Complete system includes the Rieter M-USG 900 V cutter. strand transfer equipment, pellet cooler and screener The cutter IPP Stock # 205766- Rieter (Maag) the vertical d...