Used Processing in North Dakota, USA

SS holding tank with pump

SS cone bottom holding tank with pump. Single wall tank. Tank dimensions 24 in. diameter x 17 in. straight side, 6 in. tall cone. Infeed height 54 in. tall. Discharge 1.5 in. diameter sanitary clamp fitting. SS c...

Belt Conveyor

Belt conveyor. White vinyl belt 80 in. long x 54 in. wide x 38 in. tall. 1 hp motor with sumimoto gearbox, chain and sprocket driven with guard. Pneumatic belt tracker. SS ribbed bed. SS tubular frame. Adjustab...

180 Degree Conveyor

180 degree Conveyor, 16 in. wide belt, 9 feet wide out side to out side, 1 HP 230/460 volt, no belt

Pizzamatic Corp. PCE-1000

• Manufacturer: Pizzamatic Corp.

2013 Pizzamatic Band Conveyor, Model: PCE-1000, SN: PCE1000-13003, 99 in. long x 36 in. wide x 34 in. tall. 1.6 ft/sec. max speed, Orange rubber band belting, SS hopper bottom, SS construction, 3/4 HP washdown mo...

Seal-A-Tron T-2213-40 Shrink Tunnel

• Manufacturer: Seal-A-Tron

Seal-A-Tron Shrink Tunnel, Model T-2213-40 Shrink Tunnel, SN: T221340R61122V. Chamber dimensions: 40 in. long x 20 in. wide x 14 in. tall. Aperture: 24.5 in. wide x 14.5 in. tall. Adjustable blower speed, adjus...

Belt Conveyor

Belt conveyor, grooved vinyl belt 76 in. long x 9.5 in. wide x 33 in. tall. SS control cabinet with Allen Bradley powerflex 4 vfd, start, and e-estop. Leeson Washguard motor, 208-230 volt, 3 phase. SS frame, adj...

Unused SS Jacketed Mix Tank

Unused SS jacketed mix tank approximately 250 gallons. Inside dimensions 40 in. diameter x 48 in. tall. Top lid 16 in. diameter. (2) Liquid ports 3 in. diameter sanitary clamp. (1) Liquid port 2 in. diameter sani...

Shanklin T71

• Manufacturer: Shanklin
• Model: T-71

Shanklin Shrink Tunnel, Model: T71, SN: T08249-01, Tunnel: 60 in. long, Aperture 22 in. wide x 10 3/4 in. tall. Conveyor: 98 in. long x 15 in. wide x 36 in. tall, wire mesh belt. Variable speed conveyor, max spee...

FMS 2000B

• Manufacturer: FMS

FMS cartoner. Model 2000B, SN 1289. Product infeed, lug spacing, 6.25 in. clearance in between lugs or 3.5 in. spacing between lugs x 2 in. tall. Side push infeed. Adjustable carton magazine 24 in. long, up t...

Hobart 1730LB-1

• Manufacturer: Hobart
• Model: 1730LB-1

Hobart L-bar sealer. Model 1730 LB-1, SN 05-1045038, Series D. Long seal 30 in., 16 in. wide cross seal. Discharge conveyor 32 in. long x 13 in. wide x 34 in. tall. SS prep table 16 in. long x 14 in. wide. 2...

Liquid Carbonic Corporation JE-U4

• Manufacturer: Liquid Carbonic Corporation

Liquid Carbonic freeze tunnel. Model JE-U4, SN 30564. Last ran CO2. 36 ft. long freezing chamber. SS wire belt, 42 in. wide overall, 39 in. wide useable width. 27 in. long infeed, 36 ft. long chamber, 20 in....

2016 Unused Moline 3-Roll Extruder w/ Chunker

• Manufacturer: Moline

2016 Unused Moline 3-Roll Extruder w/ Chunker and complete touch screen controls. Still in original manufacturers skids. Never installed.New Moline Tri-Roll Extruder2016 Moline 3-roll extruder. Model TRE-18R, ...

Extreme Packaging X-16SERVOSS

• Manufacturer: Extreme Packaging

Extreme Packaging Machinery Automatic-Wrap Machine with Servo Drive. Model X-16SERVOSS, SN J-142. Lug infeed, 18 in. long spacing, 2.75 in. tall lugs, 48 in. long infeed. Timing belt conveyor infeed to lug, dua...

2014 Peerless/Fedco CMH-35-F

• Manufacturer: Peerless/Fedco

Peerless/Fedco Continuous Mixer, Model CMH-35-F, SN 214010, 13 in. dia. mixing head, 2 in. sanitary fitting inlet and outlet, 35 in. tall inlet and outlet height, (4) 1 in. female threaded ports on the mixing hea...

Hapman Helix Flexible Screw Conveyor

• Manufacturer: Hapman

Hapman Helix Flexible Screw ConveyorS/N: X15146AB100 in. long x 3 in. dia. poly flex tube w/ SS helix screw. 5.5 in. dia. discharge, 94.5 in. tall discharge height. New Baldor 2 HP motor w/ Yaskawa vfd. SS hoppe...