Used Processing in Missouri, USA

7.5 HP STERLING MODEL 7075 AIR BLOWER; S/N 66728 - Located At 314 Madison Street, Scott City, MO

• Manufacturer: Sterling

7.5 HP STERLING MODEL 7075 AIR BLOWER; S/N 66728 - Located At 314 Madison Street, Scott City, MO 63780

7.5 HP GF PUHL MODEL 209059R AIR BLOWER; S/N 0704105G (NEW 2-6-2007) - Located At 314 Madison

7.5 HP GF PUHL MODEL 209059R AIR BLOWER; S/N 0704105G (NEW 2-6-2007) - Located At 314 Madison Street, Scott City, MO 63780

24" WIDE X 110' LONG NEW 2-PLY CR80 POLYURETHANE X BARE CONVEYOR BELT WITH FASTENERS - Located At

24" WIDE X 110' LONG NEW 2-PLY CR80 POLYURETHANE X BARE CONVEYOR BELT WITH FASTENERS - Located At 315 Madison Street, Scott City, MO 63780

36" WIDE X 1/2" THICK USED RUBBER CONVEYOR BELT - Located At 315 Madison Street, Scott City, MO

• Manufacturer: Correa

36" WIDE X 1/2" THICK USED RUBBER CONVEYOR BELT - Located At 315 Madison Street, Scott City, MO 63780

2 HP NAPA MODEL 824256VAT VERTICAL TANK AIR COMPRESSOR; S/N 8090254221 (NEW F-2016), 115 VOLT,

2 HP NAPA MODEL 824256VAT VERTICAL TANK AIR COMPRESSOR; S/N 8090254221 (NEW F-2016), 115 VOLT, SINGLE PHASE, WITH HOSE REEL AND AIR GUN - Located At 314 Madison Street, Scott City, MO 63780

25 HP PACEMAKER R70AHU 4-CYLINDER HORIZONTAL TANK AIR COMPRESSOR; S/N 37215 - Located At 315 Madison

25 HP PACEMAKER R70AHU 4-CYLINDER HORIZONTAL TANK AIR COMPRESSOR; S/N 37215 - Located At 315 Madison Street, Scott City, MO 63780

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) 162011

• Manufacturer: Shopbuilt

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) Shopbuilt 24″x80′ truss conveyor (24″ deep truss) with 3x3x1/4 main cord & 2x2x1/4 lattice. 35 degree sealed idlers & 2 ply belt (good). Has gearbox, but no mot...

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

2004 FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. 510140

• Manufacturer: Furukawa

(2004) FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. (2004) Furukawa 1200ED with 12,764 frame hours (Re-man engine @6874 hrs) and 6046 impact hrs (resealed @ 5724hrs). 5.9 Cummins engin...

2002 TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS 510136

• Manufacturer: Tamrock

(2002) TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS (2002) Tamrock 700-2 hydraulic drill with 6876 hrs on Cat 3126 engine and 2981 impact hours. Set up for T45 steel with rod changer. Overall, go...

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR 162013

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR Shopbuilt 30″x50′ truss conveyor with 3x3x1/4 main cord & 2x2x1/4 lattice. 45 degree idlers, 2-ply belt, lagged head pulley, wing-tip tail pulley, & gearbox (no motor). Good con...

JOY MS-2A 530020

• Manufacturer: Joy

Year: MS-2A air track drill with Joy VCR360 hammer, square boom, operator noise sheild, and operator controls. Includes dust collector, but not installed. Drill is ready for work.

BARBER-GREENE 30″ X 42 162009

• Manufacturer: Barber Greene

Year: 3 sets of legs and 20″ OD wing tail pulley. Conveyor has 20 degree Marco idlers and Dodge TD-7 gearbox and electric motor. Wiring and starters included. Good condition.

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR 162012

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR Shopbuilt 30″x80′ truss conveyor with 3″x5″ main cord & 3″x3″x1/4″ lattice. Has a 24″ 2-ply belt, gear box, but no motor. Wing tip tail pulley & lagged head pulley. 35 degree se...

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR 163074

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR Shopbuilt 30″x16′ channel conveyor with 35 degree idlers, 5″ cans, & 2-ply belt (good). Has gearbox, but no motor. Good condition.