Used Granulators & Pelletizers in Illinois, USA

NELMOR G1820M GRANULATOR 17173

• Manufacturer: Nelmor

Nelmor model G1820M granulator. S/N 8808-28052. 18″ x 20″ feed throat, 3 knife open rotor, 2 bed knife, 40HP 230/460V motor. Insulated tray feed hopper and body panels, 6″ left hand airveyor discharge. Mounted on...

CONAIR CE912 GRANULATOR 16686

• Manufacturer: Conair

Conair model CE912 granulator, S/N 30.5900. 9″ x 12″ feed throat, 4 knife rotor, 2 bed knife cutting chamber, 5HP 970 RPM 480V motor. 4″ x 11-3/4″ wide sheet feed hopper bin discharge with 2″ OD vacuum take off. ...

CONAIR 304 20 KNIFE PELLETIZER 19053

• Manufacturer: Conair

Conair model 304 pelletizer. S/N 6-044283. 20 knife helical rotor with one bed knife. Rotor is driven by a 2 HP 460-volt A/C inverter duty motor and controlled by a Sharp / Toshiba ESP-130 drive.

CUMBERLAND 1220 GRANULATOR 17979

• Manufacturer: Cumberland

Cumberland model 1220 granulator. S/N 293400-00503. 12″ x 20″ feed throat. 3 knife open rotor, 2 bed knife. 15 HP 230/460-volt motor. Insulated tray feed hopper and body panels. 4″ OD left hand airveyor discharge...

CUMBERLAND 584 GRANULATOR 16508

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 335000-90001. 14″ x 20″ feed throat, 3 knife slant cut open rotor, 2 bed knife, 30HP 230/460V motor. Insulated tray feed hopper with 8″ ID left hand pipe chute gravity dischar...

NELMOR G1012M1 GRANULATOR 14870

• Manufacturer: Nelmor

Nelmor model G1012M1 granulator. S/N 8612-25141. 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife. 7.5HP 208-230/460V motor. Insulated tray feed hopper with rear 3″ x 12″ wide sheet feed swing out. Nelmor m...

NELMOR G1628 GRANULATOR 16689

• Manufacturer: Nelmor

Nelmor model G1628 granulator. S/N 19637533. 16″ x 28″ feed throat, 3 knife open rotor, 2 bed knife 25HP 230/460V motor. Tangential cutting chamber, insulated conveyor feed hopper with 28″ x 16″ side feed manual ...

CUMBERLAND 8″ PELLETIZER ROTOR STELLITE 8428

• Manufacturer: Cumberland

New / unused Cumberland 8″ pelletizer rotor, 304 stainless steel and Stellite-tipped, 36 tooth helical cutter. Ceco part no. 64753.

SCHEER BAY SGS-50E PELLETIZER 18133

• Manufacturer: Scheer

One (1) used Scheer Model SGS-50-E strand pelletizer. S/N SE5-0707. Nominal 2″ wide entrance. Has 20 knife carbide inlay helical style rotor driven by an A/C motor with Reliance variable speed controller. Mounted...

GALA 5MUP UNDERWATER PELLETIZING SYSTEM 17908

One (1) used Gala model 5MUP underwater pelletizing system. Includes 2 HP cutter with four (4) blade hub, three (3) spare dies, 40 GPM TWS-40 water system with heater, pump, heater exchanger, 5 HP model 8.2 BF dr...

MAAG 60E 30 KNIFE PELLETIZER 18631

• Manufacturer: Maag

One (1) used Maag “Primo” model 60E strand pelletizer having a 2.36″ (60 mm) entrance. Thirty knife helical rotor. 2.2 KW (3 HP) drive. 480/3/60. Poly top roll and steel bottom roll. Includes starter and touch sc...

NELMOR 1220RGII GRANULATOR SYSTEM 18374

• Manufacturer: Nelmor

Nelmor model 1220RGII granulator. S/N 8308-19636. 12″ x 20″ feed throat. 3 knife solid rotor, 2 bed knife. 25 HP 460-volt motor. Insulated tray feed hopper and body panels. Side mounted model F512 3 HP blower dis...

CUMBERLAND 284 GRANULATOR WITH FEED 17151

• Manufacturer: Cumberland

Cumberland model 284 granulator. S/N 325525-7717. 10″ x 12″ feed throat 3 knife open slant cut rotor. Two (2) bed knives. 10HP 230/460V motor. Insulated tray feed hopper with rear mounted 8″ wide x 2.5″ OD knurle...

GALA MUP7 UNDERWATER PELLETIZING SYSTEM 18847

Used Gala MUP 7 underwater pelletizing system (2010). Serial number 10300372.Package consists of the following: A) 6″ hydraulic slide plate screen changer with stand and 3 HP power pack B) 15 KW Cutter with stand...

REBUILT NELMOR G3030HD GRANULATOR 18484

• Manufacturer: Nelmor

Nelmor model G3030HD granulator. S/N 9606-37721. 30″ x 30″ feed throat. 5 knife rotor with knife carriers, 2 bed knife. Dual Fly-wheels. Tangential cutting chamber. 100 HP 230/460-volt 1181 RPM motor. Insulated l...