Used Sheet Metal Processing in Switzerland

Best Brands sheet metal machines in Switzerland

• Manufacturer: Best Brands

see Attach. at the bottom - Beyeler/Bystronic - COLGAR - Finn-/Prima-Power - Gasparini - LVD - Salvagnini - Schiavi - Trumpf ..... Floreani & Partners +39 393 577 2205 Alex/mob. alex.groupmarketing@gmail.com

2010 PLASMATOME 20 MPC 51131

• Manufacturer: PLASMATOME

The plasma is in operation, if anyone wants to see it there would be no problem to make an appointment. Expected dismantling date, second half of July 2025

2001 LASCO TZP 1000 SO 46228

• Manufacturer: Lasco

Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB lo...

2003 LOIRE SAFE EDIMR 800 46229

• Manufacturer: Loire Safe

Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner hei...

1980 RASKIN 2016 ST 47801

• Manufacturer: Raskin

Strip unwinder LASA AH-32 R Straightener LASA HDC-32-11 R/CDL GPA ANM 500x300 gripper feeder VOLTAGE 220V - TRAFO 380V available Press can be inspected under power

1995 KAISER V63/620 54501

• Manufacturer: Kaiser

Operating hours: 74601 (measured on 14-05-25, machine is still in use) Maintenance records available upon request

2003 NEFF DP 800 46230

• Manufacturer: Neff

Complete hot forming line consisting of: * Hydraulic press NEFF 800 to. * Ruhstrat furnace system: - Natural gas heating - Temperature 930°C - max. lining width: 1850 mm - Furnace length: 10800 mm * Strothmann Fe...

SCHULER S2-160-1.25-30-160 49505

• Manufacturer: Schuler

Object: 49505 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Total force (nominal): 160 to | Table surface (left-right): 1130 mm | Table surface (front-back): 1000...

SCHULER PH 200/1 48524

• Manufacturer: Schuler

Object: 48524 | Drive system: hydraulic | Openings in uprights: no | Number of slide actions: 1 | Table cushion: yes | Total force (nominal): 200 to | Table surface (left-right): 1000 mm | Distance table - sli...

1972 KAISER 60 P 42789

• Manufacturer: Kaiser

Object: 42789 | Total force (nominal): 60 to | Slide adjustment: 70 mm | Stroke min.: 11 mm | Stroke max.: 60 mm | Variable speed: yes | Stroke rate (min.): 60 /min | Stroke rate (max.): 240 /min | Strip f...

1983 SMT MV20 BL5022 42997

• Manufacturer: SMT

Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx....

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038

1978 FEINTOOL GKP F 250 48186

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

2002 FEINTOOL HFA 8800 PLUS 36813

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...

1981 FEINTOOL GKP F 40 32359

• Manufacturer: FEINTOOL

Object: 32359 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 40 to | Stroke: 45 mm | Stroke rate (max.): 90 /min | Lower table (left-right): 280 mm | Lower table (f...