Used Foundry & Casting in Belgium

Bottom pouring ladle SENSENBRENNER 7t

• Manufacturer: Senssenbrenner

With planetary gearbox Dimension: width: 2550mm; depth: 1500mm; height: 3380mm Useful dimensions: Ø1490mm; height: 1500mm 2 ladles in the same size Both of these ladles has one bottom pouring system

Bottom pouring ladle SENSENBRENNER 15t

• Manufacturer: Senssenbrenner

With planetary gearbox Dimension: width: 2700mm; Depth: 1900mm; height: 3950mm Useful dimensions: Ø1700mm; height: 1700mm

Double bottom pouring ladle SENSENBRENNER 25t

• Manufacturer: Senssenbrenner

Dimension: width: 3300mm; depth: 2100mm; height: 4500mm Useful dimensions: Ø2000mm; height: 2250mm With 2 bottoms pouring system With planetary gearbox

Pendulum grinder Ø500

Dimensions: length: 2800mm; width: 1400mm; height: 800mm With pneumatic cylinder for bending -( down pushing assistance) the machine With 2 motors, each 11 KW 400/690V; 50Hz V belt driving

Screw mixer WÖHR 20-40t/h

• Manufacturer: Wöhr

Useful dimensions: Outlet: 2500mm; conveyor belt: 4000mm Control board SIEMENS S7 300, 400V 50Hz 2 pumps for acid/ hardener with flow measurement ENDRESS&HAUSER For furan sand 3 dosages for sand The 2 arms motori...

Soundlevelmeter CHAUVIN ARNOUX

• Manufacturer: Chauvin Arnoux

Measuring range: 35dB-130dB | Dimensions: 120×260×60mm

Core sand mixer BONIFACE ±50kg

• Manufacturer: BONIFACE

Outer dimensions: length: 1150mm; width: 650mm Internal dimensions: Length: 400mm; Ø520mm Driven by 4 belts, Unloading via hand flap

Core sand mixer BADIE MIXTENSIF, 200 l

• Manufacturer: MIXTENSIF,

Inside dimensions: Ø830 mm, depth: 410 mm With pneumatic discharge flap With protective grille

Microwaves tester HÖR - ELECTRONIC, type MLT4

With battery, 9 V In case Weight: ± 1 kg | Dimensions: length 200 mm, width 300 mm, height 80 mm

1989 Laboratorium cutter for metal

• Manufacturer: LAMAN

For disc, Ø 200 mm With mobil housing With pump for cooling liquid With bench vice Activated manually

Air analyser DRÄGER

• Manufacturer: Dräger

measurements for different gaz/vapor in the air with 4 new batteries with instructionbook

Moulding box, 510 mm x 380 mm x 120 mm

With trunnions Oval and round sleeves Weight: 12 kg/pc | Center distance: 605 mm

Moulding box, 510 mm x 380 mm x 170 mm

With trunnions Oval and round sleeves Weight: 16,5 kg | Center distance: 605 mm

1997 Gassing unit LAEMPE, 4,5 kW, with preheater

• Manufacturer: Laempe / Röperwerk

With indication of operating pressure, pushing pressure and operating pressure of the valves This unit is also equipped with a preheater and can treat cores up to ± 250 l

1995 Gassing unit LAEMPE, 4,5 kW, with preheater

• Manufacturer: Laempe / Röperwerk

With indication of operating pressure, flushing pressure and operating pressure of the valves This unit is also equipped with a preheater and can treat cores up to ± 25 l