Used Forging Presses

2006 SUMITOMO TFPX-2000

• Manufacturer: Sumitomo
• Model: TFPX-2000

Equipped With * 4 stage transfer system * Slide knockout * Bottom knockout * Scrap System >> Also available separately at extra cost * 1300 C induction heating line * Bar Bundle Rack * Billet Cold Saw

Yadon MP

• Manufacturer: Yadon

400T - 2500T adopts welded split steel body, 3150T - 6300T split cast iron body, MP(B) adopts integrated cast body; With high flywheel and high output energy, so it is suitable for hot forging and forming; With d...

1600 Ton National MAXIPRESS Forging Press, S/N 821-001 (Spare Machines), (WAS RUNNING/WIRE REMOVED)

1600 Ton National MAXIPRESS Forging Press, S/N 821-001 (Spare Machines), (WAS RUNNING/WIRE REMOVED)

Press Hot Forging Massey

• Manufacturer: Massey

Capacity : 2000 tons, Stroke : 300 mm, Stroke per minutes : 70 , Journal diameter : 490 mm, Shaft diameter at eccentric : 790 mm, Ram (left to right) : 1015 mm, Ram (front to back) : 915 mm, Between column...

Press Hot Forging Ajax

• Manufacturer: Ajax

Capacity : 1300 tons, Stroke : 250 mm, Ram Face L-R : 780 mm, Ram Face F-B : 780 mm, To Knockout Stroke : 32 mm, Ram To Table : 762 mm, Nominal Mechanical Stroke : 41 mm, Table To Floor : 750 mm, Die Seat...

1973 DIGEP EK-13AM

• Manufacturer: DIGEP

code 1363 DIGEP EK-13AM Recoil Hammer Features: impact energy 13000 kg Weight of the forging piece min 13 Max 50 kg Maximum number of shots 50 Average number of hits from 8 to 16 Total stroke of the hammer...

Press Trimming Massey

• Manufacturer: Massey

Capacity : 450 tons. Item condition: Good condition | Capacity tons: 450

2006 Skoda Open Die Forging Press CKV 6300 Ton

• Manufacturer: Skoda

This hydraulic press features a four-column, push-down design with all press cylinders, moving parts, and guide systems positioned above floor level. It underwent a complete reconstruction in 2006, ensuring long ...

1968 PELTZER & EHLERS MODEL VLP 450

• Manufacturer: Peltzer & Ehlers

Equipped With * 3 Stage Forging press * Including Elotherm Induction Heating 500V, 1000Hz, 800kW

GRABENER GKN 400/1000/450

• Manufacturer: GRABENER

Equipped With Mode of operation: Mechanical | Pressing power: 400 t | Hub stroke: 400mm | Strokes per min: 16-30 | Shut height: 1160mm | Die weight: max 3000 kgs. | Capacity: 55kW | Total weight: 43 t | Dimension...

ROVETTA F200 Hot forging presses

• Manufacturer: Rovetta

Hot forging presses 200 Tons ROVETTA Capacity: 200T | Stroke: 180 mm | Table adjustment: 15 mm | Continuous stroking rate: 120 s.p.m | Shut height: 370 mm | Distance between uprights: 610 mm | Table: 500x550 mm |...

BRET 2PM125 Hot forging presses

• Manufacturer: BRET

Hot forging presses 1400 Tons BRET Capacity: 1400T | Retrofit: 2008 | Stroke: 100 mm | Ram adjustment: 100 mm | Shut height: 1000 mm | Ram: 1600x1100 mm | Distance between uprights: 1900 mm | Lateral window: 900 ...