Used Filter Presses

Pressure Leaf Filter Stainless Steel 316 - IPP# 220997

Plate pack for a pressure filter. 3 plates, no scavenger. With holders and rods.

Stainless Steel 316 Pressure Leaf Filter - IPP# 94605

• Manufacturer: Artisan

Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each stage 12-stages, 24-rotatin...

Stainless Steel 316 Pressure Leaf Filter - IPP# 241128

• Manufacturer: Sparkler

pressure filter

Cartridge And Candle Filter Stainless Steel Austenitic - IPP# 222986

• Manufacturer: Pall

Pall filter pressure rated 10 bar @ -10/+140 degrees C (7) candles,

Pressure Leaf Filter Stainless Steel 304 - IPP# 204104

70 ltr pressure filter Centrifugal discharge packing gland on shaft Motor: 220/480 V

Pressure Leaf Filter Stainless Steel 316 - IPP# 220995

Plate pack for a pressure filter Plates stamped # 2229. Seven plates plus a scavenger. With holders and rods.

Stainless Steel 316 Pressure Leaf Filter - IPP# 202194

• Manufacturer: Alloy Fab

500 Gallon Manufactured by Alloy Fab for Dartco Shell is .250" thick Top head is .312" thick Cone is .312/.437" thick jacket is .109" thick 6.5 turns half pipe on top head 18 turns half pipe on straight side 5 tu...

Stainless Steel 316 Cartridge And Candle Filter - IPP# 230511

• Manufacturer: Pall Portsmouth

Removable top with swing bolts with hand wheels. Removable flat bottom with swing bolts and hand wheels. (2) inlet and outlet.

Cartridge And Candle Filter 0.7 m² (7.5 ft²) Stainless Steel Austenitic - IPP# 705877

• Manufacturer: Ultra filter

Additional Info:

Thune Sp45Sl Screen Plate For Thune Press #27931

• Manufacturer: Thune

Screen Plate For Thune Press Sp45sl, Plate #6 Internal, Type #5, 1.2mm Holes, 22.7% Open Area, Height: 7.5”, Outer Diameter (closed configuration): 14”

Stainless Steel 316 JENS OLSEN Nutsche Filter - IPP# 706724

• Manufacturer: JENS OLSEN

2376 liter stainless steel agitated, jacketed tumbling pressure Nutsche filter internal pressure -1/2 bar @ 50/134 degrees C, jacket -1/2 bar @ 50/134 degrees C (150 liter) nged bolt dished bottom with hydraulic ...

Cartridge And Candle Filter Stainless Steel 316 - IPP# 230507

• Manufacturer: Cuno

Rated FV/100 PSIG @ -20 to 300 dgrees F Certified by Stainless Fluid Products

Stainless Steel Austenitic Wollner & Platz Nutsche Filter - IPP# 217623

• Manufacturer: Wollner & Platz

Internal 185 litre Jacket 48 litre stainless steel jacket on straight side and bottom dish filter plate with manual raise/lower mechanism TUV certified

Tower Filter 32 m² (344.4 ft²) Plastic - IPP# 204426

• Manufacturer: Larox/Hoesch

Manufactured by Larox/Hoesch Order # 610933/34 20 polypropylen and rubber membrane plates, 1/1,25 m³ cake capacity max cake thickness 35 mm CS and FRP coated frame rubber lines filter elements pipes Trovidur HT, ...

Cartridge And Candle Filter 6 m² (64.6 ft²) Rubberlined - IPP# 200492

• Manufacturer: Dr. Mueller

Fundabac filter Filter shell 5 mm thick 369mm conical bottom 14 filter elements 82mm diameter x 1650 mm long made of polypropylene