- Trusted Seller
2022 Elumatec SBZ-128 Machining Center
- Manufacturer: Elumatec
- Model: SBZ
Four Spindles for Routing or Drilling Separating Cuts from -45° to 90° (Lead Cut), from 90° to 45° (end cut) Continuously Adjustable. Machine Configuration: Left loading magazine for automatic production processe...
- Trusted Seller
2013 Elumatec SBZ 130
- Manufacturer: Elumatec
- Model: SBZ
3-axis profile machining centre Designed for economical and efficient machining of aluminium, steel and stainless steel profiles All operations, such as routing, drilling and tapping, are performed while the prof...
- Trusted Seller
2005 Elumatec SBZ122
- Manufacturer: Elumatec
- Model: SBZ
Rapid Positioning X-Axes (max.) 1,968″/min Max. Air Pressure 102 Psi Max. Dia. Shaft for Er-32 Collet. 78″ Max. Dia. Shaft for 077 Collet .394″
- Trusted Seller
2005 Elumatec SBZ-122
- Manufacturer: Elumatec
- Model: SBZ
Machine type: Fabrication | Machine location: Ohio | Stock #: 988420 | Max machining length: 163.39″ | X-axis travels: 164.41″ | Y-axis travels: 40.94″ | Z-axis travels: 21.26″ | Spindle speed: 6,000RPM | Positi...
- Trusted Seller
2006 Elumatec SBZ 130
- Manufacturer: Elumatec
- Model: SBZ
Machine type: Fabrication | Machine location: Ohio | Stock #: 951427 | Max machining length: 165.35″ | X-axis travels: 165.3″ | Y-axis travels: 18.9″ | Z-axis travels: 12.8″ | Spindle: 6,000RPM | Spindle motor: ...
- Trusted Seller
2021 Elumatec SBZ 628s
- Manufacturer: Elumatec
- Model: SBZ
Machining Stations Sawing Station Outfeed Conveyor
- Trusted Seller
2014 Elumatec SBZ-140
- Manufacturer: Elumatec
- Model: SBZ140
Traverse Path Z-axis 24″ (620 mm) Equipped with: 4-axis controller 18.5″ colour display, USB ports and network connection Windows operating system eluCam Saw blade attachment for notching *videos available
- Trusted Seller
2011 ELUMATEC SBZ130
- Manufacturer: Elumatec
- Model: SBZ
Routing Capacity, X-Axis w/ Ends of Profile: 329.921” Angle Head Speed / Gear Ratio - 1; 2.8:1: 16,800 RPM Angle Head Speed / Gear Ratio - 1: 4:1: 24,000 RPM Diameter of Tooling In Disk Cutter Collet: 7.875” Max....
Schaumburg, IL - Trusted Seller
ELUMATEC SBZ130, 3 Axis Profile Machining Center, Turret w/8 tools, German Engineering
- Manufacturer: Elumatec
- Model: SBZ
ELUMATEC SBZ130 3-Axis Profile Machining Center, Turret w/8 tools, German Engineering 3-axis profile machining center, Windows Platform (XP Version), 8 Pneumatic Clamps, Angle Router Head (Processing Front and Ba...
- Trusted Seller
1999 ELUMATEC SBZ 130
- Manufacturer: Elumatec
- Model: SBZ
1999 Elumatec SPX 130 3 Axis Profile Machining Center. This unit is in good condition and can be inspected under power as needed. This machine can process 3 sides of an aluminum profile without moving the work pi...
- Trusted Seller
2022 ELUMATEC SBZ 628 S
- Manufacturer: Elumatec
- Model: SBZ
2022 Elumatec SBZ 628S Profile Machining Center. Machine is in excellent condition with low hours. Max. profile cross-section (WxH) 200 x 160 / 160 x 200 mm Min. profile cross-section (depending on gripper positi...
- Trusted Seller
2020 Elumatec MGS 245/32
- Manufacturer: Elumatec
- Model: MGS 245
Equipped With: – Pulse Spray Blade Lubricant System 3HP Chip Collection System Programmable Pivot and Title Control – AMS 200 Length Measurement system (right side connecting plate) – Gravity Roller Stock Table (...
- Trusted Seller
Elumatec MGS 500 SA
- Manufacturer: Elumatec
- Model: MGS
MACHINE EQUIPPED WITH Infeed Conveyor Spare 20" Blade Machine Manuals Two Had Operation Automatic Safety Hood
Chicago, IL - Trusted Seller
ELUMATEC Automatic Non-Ferrous Cut Off Saw
- Manufacturer: Elumatec
- Model: SA 14235
MODEL SA 142/35 EQUIPPED WITH: Tilting Range 90-45 degree Pneumatic Clamping Hydra-Pneumatic Blade Feed Entry and exit roller conveyor, Hytrol If you can't find the exact pre-owned machine you're looking for in o...
Monclova, OH - Trusted Seller
2005 Elumatec DG-104/02
- Manufacturer: Elumatec
- Model: DG104
(Up To 22.5° Manual with Digital Display) Machine type: Cold Saws | Machine location: Michigan | Stock #: 331328 | Bed length: 4,500mm/177″ | Minimum cutting length at 90°: 13.7795″ | Minimum cutting length tilte...
Elumatec MGS 245 Saw
- Manufacturer: Elumatec
- Model: MGS 245
Good condition Elumatec MGS 245 Saws manufactured in 2014. Located in Poland and other countries. Click request price for more information.
Poland
Tip: Enter manufacturer, model or keyword
